Typhoon intake... Why the bad rap?

[Bayer-Z28]

Don was saying that the 96mm Typhoon intake (LS1/2) is garbage and I'm wondering why.... Not calling anyone out, I've just read a LOT of mixed reviews about this.

I'm not finding much at all as far as dyno comparison on Tech about it. Just very little feedback. People buy it and then you never really hear back about it.

[84ta406]

IIRC it's made by professional products? CHEAP CHINA JUNK

All it is, is a casting that was ripped off from someone else and made overseas in china.. JUNK

[Bayer-Z28]

^ Yeah, it's Professional Products.

Some of the fancy Big screen TV's are made in China............ Not much is made in the US anymore. People forget all too quick that most of our engines are/were made in Mexico and assembled in Canada. Lowest bidder.. If the design of the intake works, what's so junk about it?? Sorry, but I don't see name calling as a solid/valid source for your argument.


AHHA!! Found this on LS2GTO...

Dated 4-9-08
Most tests on the Fast 90 or 92 intake show a aprox net gain of about 17 HP depending on your application.One guy on LS1GTO.COM just did a Vengence ported Fast 92 and a Ported 90 Throttle body and his gain was documented as a 15 HP at a cost of over $1,400.00. For about $500.00 complete with fuel rails you can get a Typhoon 96 MM intake, it might be down about 5 HP compaired to the FAST 92 or 90, but if you use nitrous or Turbo you will be glad you had the added strength. I did a unported Typhoon on my car and gained 14 HP, it can be taken apart to be ported if you like. Here is what happens when a plastic intake has a back fire. Check out the picture. my cost for intake and intall was $750.00 . The FAST will cost more then that just for the intake without rails and fittings. If you want some HP gains with a lot of strength and good looks go with the Typhoon, If the HP gain is your only goal. Go with The FAST. But remember, no matter which type of bolt on you add to your car, NUMBERS will be different from car to car.

Although -5hp for an intake that is slightly bigger can be an argument of its own.. I'm just back and fourth on the FAST vs the PP Typhoon 96. I'll have to see what tax season brings.

[ILuvPizzaTimes10]

the PPi is made for an FI setup. they are Way too big for an NA setup in most cases and stall the air in the common plenum. there over all design with the sharp turns and such is alsio part of its down fall.

if it were me id get a Fast LSX-R and call it a day. tryd true and worth every penny.

[Slowhawk]

There is no back/back tests with them because they suck. Most people get it because it's pretty.

[Bayer-Z28]

^ was just gonna get the satin piece. The only really dyno's I've seen out of it are from the 85mm, and that dude had a weird setup with other problems. I think the FAST looks better, IMO.

I don't understand how people say it's too big when the 102 seems to take up much more space.

[Slowhawk]

I'd run the LS6 over the Typhoon.

Also,I'm beggining to think FAST 102's suck ass too. Bring back the 92's.

[Bayer-Z28]

^ I remember you having tuning issues with the 102 when you first got your hands on it. If you find a 92 before I do, SAVE IT! I'll be getting one when my W2 comes in and I get some money back.

I want a bigger intake and personally I think it was a HUGE mistake for FAST to discontinue the 92. They can be hogged to around 94, or 96 right? That is a perfect size for the LS1/6's. Leave the 102's for the 2,3 and 7. I still think a 4" mouth is too big for that engine. A 4" TB to me is a darn on/off switch.

Don: If I WERE to get my hands on a 102, what size MAF should I run? I'm asking from a tuning stand point. I've been reading a lot about air velocity and whatnot with different size MAFs. Was thinking the 85 would be a bottle neck when used with a 102 TB, but it should me more responsive to air flow changes, right? Compared to a 100mm card MAF that is.

[KLAB]

It looks cool:

http://www.gtoforum.com/attachments/f38/2083d1197993226-wilson-intake-manifold-motor-right-side.jpg

But if there was plastic shroud around it it would look like a 2011 5.0 intake so fail:
http://bartowfordnews.com/wp-content/uploads/2010/03/2011_mustang_gt_engine.jpg

[Bayer-Z28]

^ If you put that shroud around an LS1/2/4/6/7 intake it would look similar too.

Ford and GM may have had the plastic intakes out at the same time, but we just perfected it right out of the gate.. :D :D

The 5.0 intake doesn't look much like ours.
http://2011fordmustang.net/images/2011mustangengine.jpg

[KLAB]

true fact it looks diff without the cover.

[Batman]

BAH! forget the typhoon, get a Hurricane!
http://www.harrop.com.au/root_folder/harrop_manifolds/amfd7022-00.html

[Formula413]

Wow, that's different...is there one throttle body for every runner?

[Batman]

Yeah 8 individual T/B's, it is the Aussie V8 supercar intake

[Slowhawk]

Harrops are nice for $4k

[Batman]

Cmon now, you can find them for $3800......

[KLAB]

thats sick haha