New Stuff!

[irockidz28]

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject056.jpg
valve covers i have had for a few months

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject055.jpg
edelbrock shorty headers with y-pipe

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject047.jpg
stock

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject050.jpg

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject049.jpg

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject051.jpg

[irockidz28]

http://i163.photobucket.com/albums/t287/bfrasa/camaroproject052.jpg
and leave it to the last one to break

[Greenbird94ta]

valve covers look nasty, same with the headers. good luck with the install. those motors are not fun to work on.

[DemonWithin99]

that should help ya breathe a little better.

[ls6monte]

Good luck Ben! Have fun!

[941LE]

looks like a ton of fun. should sound good when done. What r ya gonna do about that broken bolt?

[irockidz28]

looks like a ton of fun. should sound good when done. What r ya gonna do about that broken bolt?

i have got it soaking in PB blaster now when i get the chance to work on it probably tomorrow there is enough to get a pair of vise grips on it so ill try that maybe a little heat if i have too we will see what happens

[ILuvPizzaTimes10]

weld a nut to it.....

[Formula413]

weld a nut to it.....

What he said if you can, but try a torch first. I broke a bolt off in the block removing the thermostat housing from my Escort, just a little heating up and it came out with vise grips.

[c4boom]

heat it up with a torch then cool it with that rust cracker cold spray and it should come right out

[irockidz28]

so tried the pb blaster heating with the torch vise grips and a bolt extractor and it wont budge so were gunna try welding a nut on and see if that gets us anywhere

[941LE]

sounds like u having a fun time lol

[irockidz28]

hahaha yea having a blast with it...atleast its not the middle of the summer

[Batman]

Wow you have an 86 TPI with perimeter bolt covers? Must of been early in the production year, VERY cool

[ILuvPizzaTimes10]

its not THAT uncommon. 86 was the swap year. vettes were the same way.

[irockidz28]

yea it was early in the year..my dads built in march and according to the VIN my car is about 1000 cars before his

[irockidz28]

so i never really updated this but i came across some of the pics on my camera today so i figured better late then never right? lol

1.6 roller rockers
http://i163.photobucket.com/albums/t287/bfrasa/Carrelated071.jpg

http://i163.photobucket.com/albums/t287/bfrasa/Carrelated072.jpg

and then in the process of pulling out the push rods so they didnt dance around when we were doing the guide seals we pulled out a lifter and it fell into the valley...
http://i163.photobucket.com/albums/t287/bfrasa/Carrelated073.jpg

http://i163.photobucket.com/albums/t287/bfrasa/Carrelated076.jpg

http://i163.photobucket.com/albums/t287/bfrasa/Carrelated078.jpg

[irockidz28]

then got it back together...
http://i163.photobucket.com/albums/t287/bfrasa/Carrelated081.jpg

http://i163.photobucket.com/albums/t287/bfrasa/Carrelated082.jpg

and then running...
http://i163.photobucket.com/albums/t287/bfrasa/th_Carrelated079.jpg (http://s163.photobucket.com/albums/t287/bfrasa/?action=view&current=Carrelated079.flv)

http://i163.photobucket.com/albums/t287/bfrasa/th_Carrelated083.jpg (http://s163.photobucket.com/albums/t287/bfrasa/?action=view&current=Carrelated083.flv)

[84ta406]

The pushrods didnt rub the heads or anyhting with the 1.6 rockers did they? A lot of the times you hafta elongate the pushrod holes.

[ILuvPizzaTimes10]

i was just gunna say that along with.... They had better be self guiding rockers.....?????

[84ta406]

They look to be from the pictures. Those are good rockers.. for aluminums.

[ILuvPizzaTimes10]

i cant see the trununs or spindlles in those pics. and they need to have the 2 guides on the front that keep em centered on the valve stem. I HOPE YOU GOT THR RIGHT SHIT BENJAMIN!!!!!!

[irockidz28]

i got the right ones i did my research paul from blue magic performance ordered them for me! no faith from you guys

[84ta406]

I had faith they were the right ones... but do they rub? I know 1.6's rubbed on my heads.

[irockidz28]

no they dont rub we checked EVERYTHING once they were on..cranked the engine over a few times to make sure

[bottledbird68]

I love the throttle body plate :giggle: