Guess what people are going to dyno on sat!

[CamaroRacing12]

ok i know me and pizza r dynoing, everyone else who is dynoing speak up! and we will all guess what everyone will dyno!

im dynoing

my mods are...

moroso cai
Yank SS3600
Pro Race CPT 4l60e
coated Pacesetter longtubes w/3" true duals dumped
stock 10 bolt w/3.23's
ls1 driveshaft
Trick Flow Elbow
A/C Delete
Madz28 mail order tune
will be running 93 octane

this is a BOLT ON ONLY CAR stock heads, stock cam, no nitrous, no FI! Only bolt ons! remember that!

best 1/4 mile times are 12.42 @ 107mph @ 3250lbs raceweight


Myself - 287rwhp 312rwtq

pizza faget - 374rwhp 422rwtq

Tberry - 261rwhp 292rwtq

Irockid - 197rwhp 272rwtq

Ronnie boy - 328rwhp 336rwtq

[ILuvPizzaTimes10]

tony-305rwhp 310rwtq

mine-370rwhp 400+rwtq haha

[TBerry95z28]

im dynoing to
im guessing 235 rwhp and 260 rwtq for myself
Tony - 295 hp and 320 tq
Pizza - 380 hp and 415 tq

[ILuvPizzaTimes10]

t-berry-246rwhp 285rwtq

[irockidz28]

pizzamike~370/425

tony~dont know details but 280/330

me~ praying for 200/270

[CamaroRacing12]

pizzamike~370/425

tony~dont know details but 280/330

me~ praying for 200/270

fixed!

[Formula413]

Pizza - 380 hp / 1,300 tq (conservative estimate of torque)

Tony - 275 hp / 300 tq (converter will eat up some power)

Ben - 195 hp / 275 tq (you got your headers on right?)

TBerry - 245 hp / 280 tq

[CamaroRacing12]

u going on the rollers alex?

the thing about my car even if the numbers r low i will be still very impressed, knowing what i run with such low #'s, if the #'s r high i will be happy cuz they r high! lol

[*LS1* Queen]

i might dunno yet

[KLAB]

Me ~ 73fwhp 14fwtq

[My84Z]

pizza 375 and 415
tony 250 275
tberry 252 260
irockid 199 230 sorry man but that is how my luck would be lol

[ls6monte]

Any guess's on mine? lol

[kaboom]

Me ~ 73fwhp 14fwtq

lol mines bone stock 2 but my luck you'll still have more ponies

[KLAB]

I meant to say 73fwgp, front wheel gerbil power.

[smokinss]

Pizza- 375rwhp 390 rwtq

Ron- Blows tranny on Dyno!!! J/k 340 rwhp 340 rwtq

[My84Z]

Ron what is different? I will say the same number unless you havn't dyno'd at the new shop yet and then I will say 15 less then before.

[ILuvPizzaTimes10]

dont forget ron had his TB ported and picked up 2 mph and 2 tenths.... MAYBE the good air... so ill say he picked up one tenthish on a TB port....

Ron makes 351rwhp 336rwtq

[DemonWithin99]

Demon = 325hp 333tq

[Bayer-Z28]

No idea as far as anyone else.. Not too too familiar with the cars. But, Bolt on LS1's prollly about 335/345, Bolt on LT1,s about the same.. H/C cars around 400-440rwhp, 370-400 rwtq.


but as far as mine::
Lower altitude MAY net me some more power, but I need a re-tune from the big drop in altitude and I've heard his dyno is tough to churn out higher #'s, so I'll guess the same as I have now.. = 414/372 I need nitrous. Just think those are embarrassing #'s.

[irockidz28]

^EMBARRASSING #'S!?!?!?!?! lol i just barely beat a v6 last time and you got well over double what i have gohd hahahahaha

[Bayer-Z28]

^ I just expected maybe 440/390 out of my cam.. But my current #'s are actually with in reasonable tolerance of what the designer made with it running a ported FAST 90, SD Tune and AFR 225 Heads and prolly a killer exhaust. I just want to be around 480/450 rw.. a little spray should push me to 500rw.. :)

And I put down 336/346 on just bolt ons.... Soooo I get a custom grind TQer cam with some decent heads and it only nets me 26ft lbs?? Somethings off.

[ILuvPizzaTimes10]

i wouldnt say somethings off. i bet that cam didnt bring the "number" you wanted But it brought the torque curve out enough you made what almost 80rwhp. i wouldnt bitch about that at all.

[Bayer-Z28]

Yeah, that's the thing that impressed me. This cam puts down better #'s than the TRaK cam. Slightly better, but still better. And it's a smaller cam and has great street manners. :) From what I thought I knew about TQ production, I am still researching the intake side of this equation.

I've been told it needs a little more fuel in the lower R's. I'm just itchin to get it tuned again soon.

[Formula413]

People get way too caught up in the numbers, rather than whether the car is fun to drive. You can't drive a dyno sheet. :)

[CamaroRacing12]

People get way too caught up in the numbers, rather than whether the car is fun to drive. You can't drive a dyno sheet. :)

Amen Alex :beer:

[*LS1* Queen]

im gonna dyno 1000hp hahahahaha ya i wish

[CamaroRacing12]

don should dyno this...

http://www.ls1tech.com/forums/drag-racing-tech/1167050-672bbc-twin-turbo-o-l-10-5-a.html

[Bayer-Z28]

I think if I end up moving back out to Vegas, I'm gonna get some tools and tubing and such and fab my own turbo system. :)

[c4boom]

I think dons dyno is only good for 1000 HP

[TBerry95z28]

that build is insane haha

[CamaroRacing12]

oh lol