QA1 275# front drag springs
 

anyone interested in a set of front QA1 275# front drag springs, got them off tech, i'm just going to keep the stock springs for now until my wallet allows for an upgrade, they are in real good shape, i paid $86 with paypal and shipping but i'll let them go for $60 to a member on here,i prefer pick up but i will ship at buyers exspense, i will post pics tomorrow

just springs? and these are the more drag racing ones right?

http://www.fquick.com/images/vehicle...7786310682.jpg

1993 - 2002 Camaro & Firebird Front Springs
QA1 offers the perfect springs for 1993 - 2002 Camaro/Firebird front suspensions using the GEN-F front shock. QA1 now offers three spring choices for your Gen-F vehicle. Purposely built with factory and modified small block cars in mind, the springs below are designed to set on the GEN-F spring seat and fit into the factory location at the top. When used in conjunction with the GEN-F front shocks, they are unmatched in ease of installation and performance.





WHAT IS SPRING RATE?
Spring rate refers to the amount of weight that is needed to compress
a spring one inch. If the rate of the spring is linear, its rate is not
affected by the load that is put on the spring. For example, say you
have a 200 lb. per inch spring - it will compress 1” when a 200 lb.
load is placed onto the spring. If another 200 lbs. is put onto the
spring, the spring will compress another inch. At this point the load
on the spring is 400 lbs. The rate of the spring, however, remains
constant at 200 lbs. per inch.


i was going to use these for everyday driving and track time if i ever decide to take it to the strip.

Do they lower the car any?

i think 1.5", these springs must be used with the gen-f QA1 front shock,these springs are ideal for drag racing

anyone want these? just sitting in my basement,$40

Im debating it.

anyone want these, $40

if the shocks werent so expensive i would take them off your hand..and 1.5" is a little low for a dd IMO

For serious I'll take them for free haha I'll force myself to get the shocks...

pm me, you can pick them up or maybe meet somewhere

Are you going to any meets anytime soon?

work has me very busy so i won't make the xmas party.

Hey klab, we're heading to the Xmas party next week and we work in Oxford which isn't far off from him (actually seen him in passing a couple times on our drive in). If badbird doesn't mind stopping by our work and dropping them off I'll deliver them for you.
I'd say we could meet him whenever wherever but we live an hour from work and aren't in the area too often unless it's to and from work ;)
Just throwin' it out there if that helps any.

i could do that

I'll let you knowww

still have these if anyone is interested