some 96 LT1 parts
 

well looking to see if any one here needs some of this stuff,

the stock LT! f-body cam needs to be polished normal wear ,

the 96 timming cover OBD 2, guide hole on the left side of block broke of JB weld it back on

the opti with harness and vent check valve works perfect ,

the second opti with the cap off need to clean the termals ,and one screw broke off replaced, with a screw that was tapped

black steering wheel controls

camaro drivers side window switch 93-97 ithink

one new Ignition control moduel

used MSD coil hole on the plug treminal side should still work


used coil and ICM still conected

TPS SENS a STOCK 48MM THROTLE BODY WITH A AIR FOIL

FIRE BIRD rear tire GUARDS NEW gm NEVER INSTALLED

a PRO-M MAF no screen calibrated for ram air LT1

no pics for these yet
will have a set of shorty headers Eldenbrock wraped ceramic coated still on car
a brand new ICM and coil on car ,A MSD digitail 6 with a plug and play harnes LT1 singal coil

AND thinking of the holly N O S wet system ,it has a bottle heater , MSD window switch ,fuel pressure switch ,Blow down tube

more pics
 

also a trick flow elbow kit just the clamps and rubber

price for the timing cover?

timming cover
 

kevin pm with a offer , :flashing:

add on shorty headers
 

hundred bucks




:goodevil: :goodevil::goodevil:

power antenna by any chance?

anti
 

no sorry do not have

I have one that needs a new mast if you are interested

I do to fkn left it up in a carwash again... oops

You can actually get the mast separately. I went with a fixed antenna so I never repaired my power antenna but the motor/mechanism is still good, so I could fix it if I really wanted to.