Etp 215 heads,pretty much new
 

Have a set of 11 degree ETP 215cc heads,These have about a hr of run time on them,Come with dual .650 lift springs,2 rocker stand sets.chambers are 61.8cc,intake runner 213.8cc.Mast told me these can go to 245cc.They are a very nice set of heads.Will take $2,000 plus shipping.Also have a brand new set of cometic 3.9 bore x.045 gaskets will let got with heads for $2100 plus shipping.

Thanks
Tony laino
413-519-6268

Heres the flow info an specs

Cylinder Head: G III LS1 11° Application: Street / Race
Port Volume: 215cc Chamber Volume: 35cc to 72cc
Test Bore: 3.900" Test Pressure: 28.00" Water
Intake Valve: 2.040" Exhaust Valve: 1.570"

Valve Lift Intake Exhaust
.100" 74 57
.200" 152 106
.300" 219 150
.400" 266 190
.500" 301 204
.550" 312 208
.600" 320 211
.650" 323 214 .

Pics
http://a7.sphotos.ak.fbcdn.net/hphot..._5259407_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphot..._3499731_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphot...83480622_n.jpg

im looking for some ported 243's so i will take a ported set plus cash also

they are very nice heads and fully ported i wouldnt be suprised if they did around 370cfm or better at .700 lift..

if there not gone by next week they will be on my motor

back up for sale..1950$ take them seeing i sold one rocker stand set

1900$

do they need a special intake or any thing or can they bolt up to a stock ls6 cleanly

nothing special..they are 11 degree heads but will take a stock ls1,6 intake,fast or edelbrock..along with stock exh

heres a pic with my super vic on them.

http://a1.sphotos.ak.fbcdn.net/hphot...91618381_n.jpg