Need a wire diagram for nos/2step ASAP
 

Ok guys I've wiring up my lingenfelter 2step with my trans brake and nitrous kit. I am not too good with relays unless ive got a diagram. I've followed this diagram and so far so good. But I don't know how to wire my noids and the other wire for my wot switch. I've got the disable relay all pinned and I need to know where the wire for the nitrous relay goes. Take a look at the lingenfelter diagram page 11
http://www.lingenfelter.com/sites/li...ler%20v2.0.pdf

l take a look at it in a few. then ill get back to yah with my verdict!

Thanks man

Looks to me like your gunna have to wire up the yellow power wire off of your push button/switch for your line lock or trans break to activate the 2 step. Or if you used the ground to run to the switch of your line lock? Use the green wire. And the device is powered from the piggy back connectors. If that helps?

Yeah I've followed the diagram and I've got the t brake and 2step to power up. Its wiring up my nitrous and wot switch. It shows one wire of the the wot switch going to the disable relay but doesn't show where the other goes. And it shows a wire coming from the disable relay and going to a nitrous relay?

Instead of your wot switch going to your delay box directly. it goes threw that relay. So basically you won't be spraying nitrous on the 2 step. Cuz basically the nitrous system doesn't know you just sitting still. How do you have the wot switch wired now?

I don't have any of the nitrous guys wired at this time. Both noids and wot switch are unhooked.

All set thanks