North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Third Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=15)
-   -   Blew it up ----------> (http://www.northeastf-bodyassn.com/showthread.php?t=829)

John in RI 03-22-2010 04:43 PM

Blew it up ---------->
 
Well - that was the shorted amount of time I've ever run a SBC before klilling it ! I got about 6 months and around 1000 miles on the TBI motor in my 91 RS before it died. I was beating on the car pretty hard doing burnouts and even some highway fun a couple weeks back and noticed it was running a bit wierd when I parked it. The next day I fired it up only to hear the dreaded lower end knock.

After taking the car for a ride it was obvious the motor was toast and by the time the ride was over the engine was making a LOT of weird noises and was running on 3/4 power ( or so it felt ). Thankfully the nice weather last week enabled me to get the motor pulled so I could start working to replace it. I got another 305 TBI, swapped the pan, heads, and all accessories onto the "new" block and got it re-installed yesterday. ( I had already replaced the valve seals and added 1.6 rockers to the original heads and swapping them allowed me to install some new head gaskets while I was in there.) Most of the swap is completed but I've still got some work to do before attempting to start the car. ( exhast. cooling, P Steering connections ect.. )

http://berlinetta.info/mypics/91RS/LO3Morning.jpg

http://berlinetta.info/mypics/91RS/LO3Aftenoon.jpg

Lets see if I can get better than 1000 miles on it this time !


:D

Batman 03-22-2010 05:10 PM

try breaking it in first, just my $.02

John in RI 03-22-2010 05:45 PM

I could only WISH that it was a new engine !!!!!!! Original milage was unknown - guessing it had about 130-150 on it based on the internals.

The only new motor I ever bought was the 355ci that's in my Berlinetta from Chad Golen. OK - OK,.... I had to bring that one back to him twice due to bent valves so maybe I should just put a block of wood unde the gas pedal in my cars as a deterant !!


:D

TBerry95z28 03-22-2010 09:01 PM

Quote:

Originally Posted by John in RI (Post 13815)
I could only WISH that it was a new engine !!!!!!! Original milage was unknown - guessing it had about 130-150 on it based on the internals.

The only new motor I ever bought was the 355ci that's in my Berlinetta from Chad Golen. OK - OK,.... I had to bring that one back to him twice due to bent valves so maybe I should just put a block of wood unde the gas pedal in my cars as a deterant !!


:D

haha yea maybe that will help save some cashhhh

ls6monte 03-22-2010 11:16 PM

Or maybe drive like an old lady once in a while?????? lol

irockidz28 03-22-2010 11:40 PM

^ thats boring lol

John in RI 03-23-2010 01:04 AM

Quote:

haha yea maybe that will help save some cashhhh
Block of wood < Engine block

Good point !

Quote:

Or maybe drive like an old lady once in a while??????

" I Don't Wanna' grow up,..... I'm a Toys-R-Us Kid !! "


:D

84ta406 03-23-2010 01:07 AM

Atleast you dont have thousands into a motor and it breaks.

My84Z 03-23-2010 01:07 AM

hahaha leave it to the old lady to say drive like an old lady ahhahah I would say get a stronger motor it ends up costing the same after a couple junkers.

ILuvPizzaTimes10 03-23-2010 02:12 AM

Kick Ass!!! well sucks but the new motor looks NICE!!!


All times are GMT. The time now is 03:35 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.