as far as i can tell there is no hot going into the signals pod at all, yet, the headlights, parking lights and hazards all work. which, doesnt make any sense to me either.
http://i670.photobucket.com/albums/v...f/DSCF0070.jpg
http://i670.photobucket.com/albums/v...f/DSCF0068.jpg
ok, in the pic of the pod from behind, the wire all the way to the left, kid of a faded orange, when the parking lights are on, this shows hot on my test light. if i touch the 2nd yellow from the right, that turns ON the hazard lights. if i touch one of the White wires, it turns off the parking lights. but the parking lights off, that faded orange wire does not show hot. and as i go down and touch each other of the soldered points, none turn on the signals [except the hazards] and none show hot.
is this because of the stoopid lights controller? there has to be an easier way to make the signals work, how do the guys building street rods from nothing hook up their signals. know what i mean?
__________________
===================================
'84 Camaro Berlinetta
377ci standard bore stroker
all motor, lookin for 11's.
