Quote:
Originally Posted by Camaro9969
Borg s480 specs.
* Currently the highest-flowing S400SX unit available, with maximum compressor flow over 120 lb/min. Will service1200+HP.
* Wheel Dimensions: Compressor: 80.3 mm inducer, 115.8mm exducer, with exclusive Extended Tip Technology. Turbine: 95.5 inducer, 87.9mm exducer. Cast in Inconel 713 for high-temperature operation.
* Housing A/R: Compressor .66, with 5.5" hose-type inlet, and 3.0" hose-type discharge. Turbine: 1.32, with 'divided' volute, featuring 'T6-style' turbine inlet flange(4.438"x2.75"), and quick-release v-band dischargeflange.
|
Not trying to be rude just helping ya out.........Its a 80 mm not 96.
* Wheel Dimensions: Compressor: 80.3 mm inducer
Thats your measurement for adversized size. Thus the 80 part of s480
if it was a 96 it would read s496
The 120 lbs/m is definatly the number to worry about and yes that converts to supporting 1,200 hp at the crank
hope this helps