F-Body Weights List

[SLP IROC-Z]

Heres a list of stuff i weighed (stock & aftermarket) with our digital refrigerant scale:

Stock:

156.35# 10 Bolt, 4.10 Richmonds, Torsen Posi, No Brakes/Fluid, Summit Cover, LT1 Caliper Brackets, No 3 or 4 channel ABS
152.20# 3.23 LT1 10 Bolt, Auburn Posi, TA Girdle, ARP Wheel Studs, No Brakes/Fluid, LT1 Caliper Brackets, 3 Channel
47.50# 02 Chrome SS Wheel "ZR1" w/ 275/40/17 Goodyear Eagle F1 GS
45.00# 98-02 Flat Hood
32.00# Stock Muffler, Tailpipes & Over Axle Pipe
31.00# Rear Bumper Reinforcement
30.75# 99 Camaro Leather Manual Passenger Front Seat
26.00# 275/40/17 Goodyear Eagle F1 GS
23.30# Monster Stage 3 Pressure Plate
23.00# Front Bumper Reinforcement
22.40# 28 Spline 10 Bolt Axle w/Bare Backing & NO Axle Bearing (same weight per side)
21.50# 02 Chrome SS Wheel "ZR1" 17x9
20.40# LS1 Front Knuckle W/Hub
19.50# RAM VDS Pressure Plate
19.05# Salad Shooter Wheel
17.20# LS1 Front Brake Rotor
16.55# 99 Camaro Leather Rear Seat Backrest
14.95# LS1 Rear Brake Rotor
11.90# Stock LT1 Rear Brake Rotor
11.30# OEM 3.42 10 Bolt Ring & Pinion
10.70# LS1 Front Brake Caliper
7.20# LS1 Rear Brake Caliper
6.10# Stock LT1 Rear Spring
3.65# LT1 Drivers Air Bag
3.40# 99 Camaro Leather Rear Seat Bottoms
3.20# Stock Rear Decarbon Shock
2.65# Stock LT1 Ebrake Cables, Pair


Aftermarket:

211.59# Quick Performance 9" w/Sway Bar Mounts, Stock Sway Bar, Strange Pro Iron Case, 4.57s, Drag Spool, 31 Spline Axles, LS1 Backing Plates, Billet Aluminum Yoke, Torque Arm Bracket, ARP Wheel Studs, LCA Reloc Brackets
75.00# Bare QP 9" Housing
69.75# MWC Fab 9 Narrowed 6" w/Back Brace & ARB, Tow Loops,
32.65# Strange Pro Iron 9" Case
28.95# 15x4 Weld RTS w/ 165/80 Nankang 668
24.75 RH Side 35 Spline Strange Axle & Bare Backing Plate Plus Axle Bearing & 3" 1/2 20 Screw In Wheel Studs
24.70 RH Side 31 Spline Moser Axle & Bare Backing Plate Plus Axle Bearing & 3.5" ARP 1/2 20 Chromoly Wheel Studs
23.80 LH Side 31 Spline Moser Axle & Bare Backing Plate Plus Axle Bearing & 3.5" ARP 1/2 20 Chromoly Wheel Studs
23.35 LH Side 35 Spline Strange Axle & Bare Backing Plate Plus Axle Bearing & 3" 1/2 20 Screw In Wheel Stud
22.00# 3" Mild Steel 1350 Driveshaft
21.30# MWC Chromolly Tunnel Mount Torque Arm Setup w/ Driveshaft Loop
21.20# MT Drag Radial 255/50/16 Spanked
19.30# CM UMI Tunnel Mount Torque Arm
19.00# Hoosier 26x11.5x15 Quick Time Pro DOT
18.10# Motive Performance 4.57 Ring & Pinion
18.00# VFN Flat Hood
17.00# 165/80/15 Nankang 668
16.75# Strange HD aluminum 9" Case
16.40# 9" Truetrac
16.24# 15x10 7.5 BS Weld RTS
13.25# Loudmouth Over Axle & Tail Pipes, No Tips
13.05# PST 3.5" Aluminum 1350 Shaft For T56/9"
13.00# Strange Billet Aluminum Street Daytona Pinion Support w/ Forged Aluminum Yoke & 10 tooth Pinion Gear (4.30)
12.50# Half Of One SLP SFC
12.45# Motive Performance 10 Tooth 4.30 Ring Gear
12.00# CM UMI TA Tunnel Mount X Member w/Loop
11.80# Motive Performance 4.57 Ring Gear
11.60# 15x4 Weld RTS
9.70# Ford 9" Steel Spool, 31 Spline
9.45# QP 9" Torque Arm Bracket
7.55# 31 Spline Quick Performance Chromolly Light Weight Drag Spool
6.55# SLP Driveshaft Loop
6.20# TA Girdle w/ Bolts
5.00# Summit Girdle w/ ARP Bolts
3.75# QA1 Rear Single Adjustable Shock
.70# ARP Ford 9" 2.5" Chromoly 12x1.5mm Wheel Studs (5)
.60 ARP 2.5" Chromoly 12x1.5mm Wheel Studs (5)
.55# ARP 5/8x.950x7/16x20 Ring Gear Bolts (10)
.40# 1.5" 12x1.5mm Wheel Studs (5)