|
#1
07-30-2010, 02:41 AM
|
|||
|
|||
FS: SBC parts
1.) Comp cams Pro Magnum Hyd. roller lifters for non roller block
http://www.summitracing.com/parts/CCA-885-16/ $350 2.) Comp cams Pro Magnum pushrods http://www.summitracing.com/parts/CCA-7608-16/ $80 3.) Stainless steel roller rockers, 1.5 ratio for 7/16 studs w/ poly locks http://www.speedwaymotors.com/S-B-Ch...Arms,6526.html $175 4.) World Sportsman II heads, mildly ported, 10* locks and retainers, Comp cams 1.550 Double Springs, pushrod guides, Stainless 2.02/1.6 valves ARP 7/16" rocker studs, setup for a roller cam $600 5.) Victor Jr. manifold #2975 never been ported. $125 6.) 400 SBC short block 509 block, needs cam bearings but other than that it ran MINT with my combo. Comes with balancer and Flexplate $300 7.) Hooker #2210 Longtube headers. 82-92 F-body with SBC $300 obo 8.) Gear drive timing set $30 Just message me if you want pics of anything.
__________________
Cammed 305, Minor bolt ons... LSR Engineering - Founder [406ci SBC] [TH400, 4200 stall] [Moser 9" rearend] Track times to come this spring/summer. 
|
|
#2
08-05-2010, 11:11 PM
|
|||
|
|||
|
Take the whole motor for $1200!
__________________
Cammed 305, Minor bolt ons... LSR Engineering - Founder [406ci SBC] [TH400, 4200 stall] [Moser 9" rearend] Track times to come this spring/summer.
|
|
#3
08-10-2010, 10:59 PM
|
|||
|
|||
|
Bump, please ask around for me guys, really want this stuff gone.
__________________
Cammed 305, Minor bolt ons... LSR Engineering - Founder [406ci SBC] [TH400, 4200 stall] [Moser 9" rearend] Track times to come this spring/summer.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
