North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LSX Powertrain (http://www.northeastf-bodyassn.com/forumdisplay.php?f=37)
-   -   crank but no start (http://www.northeastf-bodyassn.com/showthread.php?t=2901)

941LE 05-31-2011 08:40 PM

whelp its defintaly the fuel pump. Hopefully if all goes it'll be towed to Dons by tomorrow to get the new one installed.

ZFreie 05-31-2011 09:15 PM

Quote:

Originally Posted by 941LE (Post 49099)
whelp its defintaly the fuel pump. Hopefully if all goes it'll be towed to Dons by tomorrow to get the new one installed.

Or pay don to do it lol

KB93z28 05-31-2011 10:30 PM

Thats shitty guy, seems like if its not one thing, its another huh? damn cars, friggin money pits!!!......rant lol :reaction:

Formula413 05-31-2011 11:31 PM

That blows, but at least it wasn't an on again/off again gremlin kind of thing

ZFreie 06-01-2011 01:10 AM

Quote:

Originally Posted by Formula413 (Post 49122)
That blows, but at least it wasn't an on again/off again gremlin kind of thing

I hate them

ls6monte 06-01-2011 01:18 AM

Good luck Mike!

Batman 06-01-2011 01:27 AM

What leads you to believe it is a bad pump? Check the fuel pump lead positive wire make sure it didn't come loose and hit the headers when you did the install. The fuel press gauge does work but with the big pump and oversized injectors if you see it dropping you have a problem. The fuel pump isn't very old and it is a racetronix pump so I doubt that is the issue unless it is a wire. Also when you put the headers in and had the starter out you may have pulled a wire out of the crank sensor. It happens alot. Only way to get it to throw a light is to crank the engine for 30-45 seconds and see if it throws a code or pull the starter and check the wires/plug

ILuvPizzaTimes10 06-01-2011 01:29 AM

a racetronix pump and no hotwire kit=fail.

Batman 06-01-2011 01:33 AM

Umm yeah it has the hotwire kit

ILuvPizzaTimes10 06-01-2011 01:34 AM

it does? mike sed it doesnt? im willing to bet its something to do with that. MIKE check That!!!! were did you hang the secondary relay?


All times are GMT. The time now is 06:57 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.