North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Picked up another z28 with auto this time need help!! (http://www.northeastf-bodyassn.com/showthread.php?t=3960)

irockidz28 04-01-2012 11:58 PM

Quote:

Originally Posted by fasta**z28 (Post 65499)
hmmm i will check the tag in a couple mins , but i mean it pulls good in reverse shifts perfect in 1,2 and wont shift manually into drive or overdrive will shift only somtimes mashing it and letting off , so Irockid your saying that i should move the shift linkage ? just confused!! could i still be low on fluid? i mean i pulled the pan and refilled with 5 quarts but it was real low when i got the car the other day so coukld it just need more ?

No I had to swap the valve body/ solenoids/ wiring from the original 95 trans to the 94 I don't think that that is your problem

My84Z 04-02-2012 12:32 AM

No but being 2qts low will not let it shift and probably will kill the clutches soon

ILuvPizzaTimes10 04-02-2012 01:38 PM

yeah was it low on the stick and you added it? or did you just over fill it?

fasta**z28 04-02-2012 01:48 PM

Pizza yes when i got the car it was very low on fluid so i dropped the pan repaced the solenoids and checked the band i could see and anything i could test and poke around wile off!!! so i then put about 6 quarts since in it and still seems pretty low. also found a broken ground bolt just hanging there with straps rusted to the break on the bolt, so i cleaned all the grounds and also thru a new alternator on since the other one was toasted.. i am going to go drive the thing in a couple mins i will let you guys no whats comes out of this , THANKS FOR THE REPLIES EVERYONE!!!

KLAB 04-02-2012 03:58 PM

sounds like how my car shifted with the 94 pcm in my 95 car.

pics of the car or ban and do you still have the 3rd gen?

fasta**z28 04-02-2012 06:38 PM

2 Attachment(s)
[ATTACH]Attachment 1056[/ATTACH]

there yah go ill post more when i clean her up a lil, Klab yea i got the third gen still ive had it since i was 14 im pushing 26 now lol why are u interested looking to sell it to someone that wikl take care of it and not just part it out!!

fasta**z28 04-02-2012 09:00 PM

K so i took it out on a drive with everything ive done and still no change just got a shit ton worse no i have pinging so i hooked up a scanner to it and im pulling these codes scanning the tranny and motor seprate

p0335 ckp p0336 ckp , p1371- opti harness?, p1661 malfunction with interior lighting ?

would any of these throw my car off really that bad?
do i trace wires or just go buy a crank sensor? any imput?

Formula413 04-02-2012 09:10 PM

Quote:

Originally Posted by fasta**z28 (Post 65590)
p1661 malfunction with interior lighting ?

Might try plugging back in the lights I unplugged the other day LOL

I still want to know what is going on with that Opti harness and why someone hacked into it like that, and that wire on the coil too

fasta**z28 04-02-2012 09:21 PM

yea alex im so stumped on this bought another persons headach maybe thats y it sat for 6 years lol just going thru everything and cleaning as i go shits discusting feel like punching the kid in the face and saying this is how u took care of ur fbody damn it. so do i replace opti first or ckps ? grrrr

Formula413 04-02-2012 09:59 PM

Post up some pics of the wiring that was monkeyed with and see if anyone can figure out what it might have been for.


All times are GMT. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.