North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   LT1/TPI/TBI (http://www.northeastf-bodyassn.com/forumdisplay.php?f=36)
-   -   Frankenbird Is Down For the Count. (http://www.northeastf-bodyassn.com/showthread.php?t=1591)

ILuvPizzaTimes10 08-22-2010 07:12 PM

You can see it. Heads have to come off to fix it. I need to see h ow much its going to cost to fix the fuckin thing now. And hope it doesn't need valve guides. Not to mention the valves are swirl polished and not cheap. Fucking cars and there expensive brokeness. We need a fix frankenbird fund started asap! Haha

smokinss 08-22-2010 08:35 PM

Mike hang in there bud. Remember when I thought my motor was junk and I tore it down. Who knows how long it would of sat around until I put a motor in it. I was sick to my stomach. Yes I didnt need 2 grand to fix it, but you have way to much time and money in that thing to let it go for nothing. Hang in there buddy.

Batman 08-22-2010 10:14 PM

I'd go for the GMPP rockers before comp golds, but that's me.

941LE 08-22-2010 11:47 PM

u sell that car and i will shoot u myself. TRUST ME.

Spooky 08-23-2010 12:01 AM

OMG! Just do it already. Like a suicide jumper, JUMP! Or grab your vajayjay, tuck in your meat curtains, cinch up your panties, and fix the damn thing already. What kind of rockers were they? were they no names or pro comps? It has happened to most of us. Have a supposed ok eng. and have it take a puke on ya.

ILuvPizzaTimes10 08-23-2010 02:33 AM

They were 06 scorpion self guided rockers. The lifters are what failed then took out the rockers from what I gather. Ahh well its all in "racing" I guess!

irockidz28 08-23-2010 02:52 AM

oh that makes me feel good i just put scorpion rockers in my car haha

84ta406 08-23-2010 02:59 AM

Quote:

Originally Posted by irockidz28 (Post 27596)
oh that makes me feel good i just put scorpion rockers in my car haha

Youre valve train is a lot more tame.

c4boom 08-23-2010 03:09 AM

the excessive lash due to the rhoads lifters side loaded the rockers causing the bushings to get taken out then every thing else went to hell in a hand basket

94Z28rag 08-23-2010 04:07 AM

Just get that bitch back together.

Spooky 08-23-2010 04:36 AM

why not run guide plates and reg roller rockers? It's tried and true.....

Spooky 08-23-2010 04:39 AM

were the Rhodes solids or rollers? Back in the day Rhodes were quality stuff but there were no rollers yet.

bottledbird68 08-23-2010 05:01 AM

Hey mike, look at it as a blessing in disguise.

I like to look at parts failure as "forced upgrades time". Now's the time for a good set of heads, hell, while you're at it go up on the cam too. With a good bottom end already in there there's no reason not to look at this as a reason to make another 40-50rwhp all said and done.

Screw it, seasons almost over anyhow. Park it and come out with a bang next year.

ILuvPizzaTimes10 08-23-2010 03:37 PM

i dont want to park it. haha i dont want better faster. i want my fucking car back. i dont NEED to go fast i want an 11.5 street car. i almost have that with my heads. i think if tjhe rocker was failing on the track that day wich im sure it was that damage doesnt happen over night. then it will run a little quicker. ill get my 11.5 this year if i get this shit fixed HOPING by october. but money is also another issue. this shit is getting pricey lately.

ILuvPizzaTimes10 08-23-2010 03:39 PM

and they were Rhoads OE Rollers. they couldnt take the 410lb springs i had. nothing in there paper work or online descriptions that sed they would have failed with my setup. ahh well.

84ta406 08-23-2010 04:09 PM

My springs are a tick more pressure and I use the comp pro mag lifters.

Any clue what you're looking at for a parts list?

ILuvPizzaTimes10 08-23-2010 04:12 PM

i have LS7 lifters. gunna run Lunati 440lb springs that are made for this cam. the comp mags are a little lighter then the cam card asks for. retainers/keeper. and a set of rockers i havent decided on yet. on top of a head gasket set and a couple valves.

c4boom 08-23-2010 05:21 PM

to bad the set of springs i have sitting next to me may be a bit tame for your motor
install 1.780" seat pressure 130
1.50 height is 250
1.25 height is 345#
and coil bind is 1.0625
with a 1.25 diameter.
they have a 2.125 free high
so if you shim them to 1.07 or so they will have about 415 open pressure and about 170 seat pressure with a 580 lift cam

grundens 08-23-2010 05:47 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 27613)
and they were Rhoads OE Rollers. they couldnt take the 410lb springs i had. nothing in there paper work or online descriptions that sed they would have failed with my setup. ahh well.

damn I was thinkin about picking up a set of those! how long did you run those before they failed?

my springs are rated at 420lbs open @ 1.150" ...but I'm confused on that rating, I only run .57X lift or does that have nothing to do w/ that rating? is that similar to your set up?

GL gettin it fixed up! we all have thoughts about sellin out at times so hang in there before you do somin you'll regret!!

ILuvPizzaTimes10 08-23-2010 09:03 PM

Those are pretty much my springs and lift specs. I mean they would have worked I think just fine if I didn't have self guided rockers. But the lifters still pitted the tops of my valves due to exess lash. I don't see they point in rhoads. Just get a good tune and any driveability you will see from them a tune will give you.

DAWG 08-23-2010 09:16 PM

why not look into this then????
http://www.ctfba.com/forum/viewtopic.php?t=1819

ILuvPizzaTimes10 08-23-2010 09:19 PM

Cuz I have that much money just under my hood. I don't need or want another car. If this one doesn't get fixed I'm out of the game. So id like to fix my junk or get rid of it if its gunna take too long/cost too much.

Batman 08-23-2010 10:13 PM

I wouldn't take anything east side or cartek has ever touched.....

grundens 08-24-2010 01:26 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 27630)
Those are pretty much my springs and lift specs. I mean they would have worked I think just fine if I didn't have self guided rockers. But the lifters still pitted the tops of my valves due to exess lash. I don't see they point in rhoads. Just get a good tune and any driveability you will see from them a tune will give you.

balls! I have SA rockers atm too.. I was hoping the rhoads would keep the low end tq near stock but sounds like it aint worth the risk.. how long did they last for you?

ILuvPizzaTimes10 08-24-2010 05:23 AM

I dunno maybe 1500-3000 miles before they flattened out. Id say get guidplates and run them but I really didn't notice shit of a difference man. Not worth it imo

ILuvPizzaTimes10 08-29-2010 02:54 AM

So i pulled the pass side head off today. broke 7 of the 8 inner springs. 2 valves are fucked and i stopped at 3 bad valve guides. and wen i say bad i mean i can move the head of the valve off the seat 1/4 of an inch bad. So there junk. repairable. ill sell em for cheap to someone who wants heads that made OK power and need work. but wtf do i do now. im not going to fix heads i wasnt happy with. trick flows? nothing and sell it. Awesome.

Formula413 08-29-2010 03:08 AM

Seems like a monster engine like this should have had something like Trick Flows all along amirite? Why not look at it as an opportunity to upgrade? And yes I know Trick Flows are not cheap, but like they say, speed costs money. I think it would be worth it in the long run. Deck them out with good valvetrain parts and let it rip.

ILuvPizzaTimes10 08-29-2010 03:37 AM

you gimme 3 grand and ill build a top end. ill give you my busted stock ported heads.......

Formula413 08-29-2010 03:45 AM

Hmmmm, for 3 large I'm gonna need a little more than some busted heads...maybe we can "work something out"...

c4boom 08-29-2010 05:00 AM

wow that sucks man i wonder y all the inners broke at least you know that the motor had a hell of allot more in it than how you where running it.

bottledbird68 08-29-2010 04:02 PM

Hey, the thread moved, and the name changed. I like the new title better ;)

ILuvPizzaTimes10 08-29-2010 04:11 PM

yeah time to stop being a BABY! haha get r done. might take all winter and ill have to get some shit heads if i sell the ones i have to seal it up for the bad weather. or just take the motor out again. pull the pan down really inspect for shrapnel in the motor. there shouldnt be any all the damage was contained up top and in the springs BUT assume its good and it makes you look like an ass wen your shit blows up againnnnnn and agiannnnnn. hmmmm i think im an ass......

SLP IROC-Z 08-29-2010 07:18 PM

meant to post this before: STOP WHINING

Formula413 08-30-2010 12:51 AM

Quote:

Originally Posted by bottledbird68 (Post 28085)
Hey, the thread moved, and the name changed. I like the new title better ;)

+ WON!!! :D

ILuvPizzaTimes10 08-31-2010 12:37 AM

http://i725.photobucket.com/albums/w...0/IMG_0550.jpg

http://i725.photobucket.com/albums/w...0/IMG_0551.jpg

http://i725.photobucket.com/albums/w...0/IMG_0552.jpg

http://i725.photobucket.com/albums/w...0/IMG_0553.jpg

http://i725.photobucket.com/albums/w...0/IMG_0554.jpg

84ta406 08-31-2010 12:43 AM

I've seen worse thats been fixed.. lol

Formula413 08-31-2010 01:22 AM

Is that a nick on the number 5 (or is it 4) exhaust valve? Or is it just the picture?

ILuvPizzaTimes10 08-31-2010 02:19 AM

Picture. No nicks or cuts or any visible damage to the head at all. I'm havibg it checked for valve guides. And to install new springs.

Bayer-Z28 09-01-2010 03:28 AM

Quote:

Originally Posted by kaboom (Post 27559)
x2
you got so much time and $$$ invested its a shame to get rid of it. if you got the room to store it i'd put it away for the winter early and give yr self a chance to calm down recoup some $$$ and work on it over the winter, u no how bad you'll want to finish her come spring

This is the best, level headed piece of advice in this thread right now.. Very well said....


Quote:

Originally Posted by ILuvPizzaTimes10 (Post 28298)
Picture. No nicks or cuts or any visible damage to the head at all. I'm havibg it checked for valve guides. And to install new springs.

Good to hear dude.. Is this what your mis-fire/stumble was from? Just a BAD valvetrain problem?

smokinss 09-20-2010 10:35 PM

good to see your going to get it done. She will be ripping it up before ya know it.


All times are GMT. The time now is 01:04 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.