North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   For all the lt1 haters... (http://www.northeastf-bodyassn.com/showthread.php?t=3366)

ILuvPizzaTimes10 10-09-2011 02:46 AM

then its the opti sensor. all things point there. oil+water+opti=Fail ever time! sorry bro. i know Klab has an Extra? not sure

bottledbird68 10-09-2011 06:55 AM

Yeah but if the opti sensor were bad wouldn't I be getting high res and or low res pulse fault codes? I not getting any codes at all.

ILuvPizzaTimes10 10-09-2011 12:17 PM

not always no. just like if a maf was bad. its the reading the ecm is looking for and what ever that reading is it takes it as truth. so if the opti sez motor at800rpm and it at 1200 then it sez 1250 and its at 3000 the computer dont know.

Formula413 10-09-2011 02:09 PM

Another dumb question: the SES light works right?

bottledbird68 10-09-2011 02:59 PM

Yes alex the light works lol.

KLAB 10-11-2011 01:38 PM

test the signals coming out of the opti and to the opti? I had a bad PCM OR bad tuning, and I tested every pinout on the PCM and they all checked out, so diagnosing the PCM didn't really work in my case but I'd say if you can get your hands on a 94-95 PCM try switching them.

bottledbird68 10-11-2011 06:37 PM

I'm just at the point where I no longer care. Want it gone and I lopped almost 3 grand off my original price to hopefully make that happen.
I'm done with the car. Sooo beyond fed up.

KLAB 10-12-2011 12:57 PM

LT1's suck

Formula413 10-12-2011 03:49 PM

Quote:

Originally Posted by KLAB (Post 56907)
LT1's suck

Mine doesn't :p

KLAB 10-12-2011 06:33 PM

Quote:

Originally Posted by Formula413 (Post 56916)
Mine doesn't :p

You wont be saying that when you start having problems bahahahahahahhaah ahahhahahhahahah HHAHAHAHAHA LOLOLOLOLL LOOOOOOOOOOOOOOOL.

I cant wait for the threads :klab:

ZFreie 10-12-2011 07:08 PM

Quote:

Originally Posted by Formula413 (Post 56916)
Mine doesn't :p

Neither does mine lol

I think some of you just have bad car luck, nothing EVER goes wrong in my cars, and if it does its in my drive way lol and I've owned quite a few $1000 beaters.

KLAB 10-12-2011 10:58 PM

Every car has issues just saying. When you have an issue that has to do with the LT1 wiring / pcm / opti and ignition system and have to figure it out yourself, then you'll get the idea...

ZFreie 10-12-2011 11:07 PM

Quote:

Originally Posted by KLAB (Post 56923)
Every car has issues just saying. When you have an issue that has to do with the LT1 wiring / pcm / opti and ignition system and have to figure it out yourself, then you'll get the idea...

My jeep had wireing issues trust me lol i know how annoying it is, but i could always get it to work, and no one else could lol

I still say i have have good luck....

bottledbird68 10-13-2011 06:16 AM

Quote:

Originally Posted by KLAB (Post 56923)
Every car has issues just saying. When you have an issue that has to do with the LT1 wiring / pcm / opti and ignition system and have to figure it out yourself, then you'll get the idea...

^ This!!! Lololololololololol!!!!!!



Fml :(

And, fmlt1!!!! :D

bottledbird68 10-27-2011 01:16 AM

All fixed I believe. Got an hours worth of drive time in so far and it's running mint. Better than ever.
I threw my hands up. Was fed up and wanted nothing to do with it. My other half however refused to give up.
After some testing it turned out that the new fuel pressure regulator we put in was defective. It was pouring fuel out of the vaccum nipple through the little plastic line back into the intake and flooding the hell out of it.
Never would have thought it could move that much fuel but apparently lol.
So far so good though and running the best it ever has :)

ILuvPizzaTimes10 10-27-2011 01:58 AM

Wow..........

DavidS 10-27-2011 02:04 AM

Quote:

Originally Posted by bottledbird68 (Post 57501)
All fixed I believe. Got an hours worth of drive time in so far and it's running mint. Better than ever.
I threw my hands up. Was fed up and wanted nothing to do with it. My other half however refused to give up.
After some testing it turned out that the new fuel pressure regulator we put in was defective. It was pouring fuel out of the vaccum nipple through the little plastic line back into the intake and flooding the hell out of it.
Never would have thought it could move that much fuel but apparently lol.
So far so good though and running the best it ever has :)

That's GREAT Matt!!!! Your perseverance paid off. Nice!

Formula413 10-27-2011 02:06 AM

No wonder it acted like a bad ECT sensor

bottledbird68 10-27-2011 03:27 AM

David, not my perseverance, my fiancés. I gave up weeks ago lol.

She wouldnt let it be. I keep calling her the automotive version of house :)

Grovlet 10-27-2011 03:48 PM

Interesting.... That's an odd issue I had not heard of happening... And a Very Hard on to find without real diligence.

Glad to hear it's up and running.

Here's to the LT1:all_coholic: (They will drive you to drink:sFun_explosive:)

Edit: Waiting the Burnout Pics :gears:

holokosta 12-21-2011 01:49 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 56476)
all those orings do is keep the opti centered. how many times do i have to tell you! oil that geting to these it always coming from either the intake front "chine" wall. or the oil pump drive shaft seals. and i put i think 1500 miles on that opti before i sold it to you! i bet it was the rain bad winter we had and letting it sit. only times ive had issues with optis is wen the car sits for a LONG time with out being started. Good Luck! and make sure the new cap you get fits YOUR Opti. yours is now different with the extra bolt up top.


Pizza whats a "LONG" time consist of?

ILuvPizzaTimes10 12-21-2011 01:53 PM

did you get an LT1?!?!?!?!?!? Or you being a jack ass? either way im ripping your balls off!!!

holokosta 12-21-2011 03:26 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 59507)
did you get an LT1?!?!?!?!?!? Or you being a jack ass? either way im ripping your balls off!!!

haha yes i got an LT1

KB93z28 12-21-2011 10:50 PM

Quote:

Originally Posted by holokosta (Post 59514)
haha yes i got an LT1

I DEMAND DETAILS, AND PHOTOS!!!!


All times are GMT. The time now is 12:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.