North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Lost power with LS6 intake? (http://www.northeastf-bodyassn.com/showthread.php?t=3914)

SLP IROC-Z 03-23-2012 02:29 AM

vinny works at smg thats probably why, lol.

ILuvPizzaTimes10 03-23-2012 02:30 AM

yeah and.

My84Z 03-23-2012 02:32 AM

:funnyshit:
Quote:

Originally Posted by VinnyDz28 (Post 64727)
Yeah i guess youre right. The heads must not be able to flow well enough. Id go with 5.3s but dont wanna bump up compression because i eventually wanna boost it. We have a bone stock besides rear mount turbo and injectors trans am pushing 450 rwhp with stock manifolds, intake, even EGR at SMG lol

Don't do a rear mount trust me 6 speed plus rear mount = slow turbo car.

holokosta 03-23-2012 02:32 AM

And... I inboxed him because I wanna take my car there to get worked in cuz don doesn't do them..

My84Z 03-23-2012 02:34 AM

:funnyshit:
Quote:

Originally Posted by SLP IROC-Z (Post 64744)
vinny works at smg thats probably why, lol.

I don't mean this how it's gonna come out. but if you work there and you and those other guys/tuners can't figure it out and prefer sd time for your shop to spend more r and d time. I don't mean to be an ass although I know it sounds that way. Same with the rear mount ta. Only auto rear mounts go ok.

ILuvPizzaTimes10 03-23-2012 02:39 AM

Quote:

Originally Posted by My84Z (Post 64748)
:funnyshit:

but if you work there and you and those other guys/tuners can't figure it out and prefer sd time for your shop to spend more r and d time.

WUT???

My84Z 03-23-2012 02:44 AM

Post was at vinny this damn phone i type fast and it misses shit. I meant if he and the shop prefer speed density tunes at that level they should spend more r and d time.

ILuvPizzaTimes10 03-23-2012 02:46 AM

Agreed. i thought thats what you meant just read weird. i even tried going over it 4 times to fix it.... haha didnt happen!

snowking 03-23-2012 02:57 AM

Quote:

Originally Posted by holokosta (Post 64713)
Because the point of the forum is to ask people their experience and expertise and opinion. Hes speculating if you haven't noticed the "might be" and the "I don't know..."

Not to sound like an asshole but that was kinda ignorant... I'm not that smart when it comes to these cars yet so alot of my knowledge comes from picking people's brains on here. He's just doin the same even though he more than likely knows a shit lOad more than i do already.

Ignorant is asking questions only to shoot down good advice.

If people give a suggestion look into it. Not say no it cant be that i did it perfectly my tunes spot on.

holokosta 03-23-2012 02:59 AM

Quote:

Originally Posted by snowking (Post 64760)
Ignorant is asking questions only to shoot down good advice.

If people give a suggestion look into it. Not say no it cant be that i did it perfectly my tunes spot on.

Agreed I mistook your previous comment and apologized earlier. I didn't realize what you were saying until a little after my apologies.

SLP IROC-Z 03-23-2012 03:13 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 64745)
yeah and.

which is why it hasnt been to don..........

ILuvPizzaTimes10 03-23-2012 03:25 AM

yeah i get it. cant cut the hand that feeds. But id go if i was in his spot and just not say anything to my employer.

Motaboata 03-23-2012 03:27 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 64767)
yeah i get it. cant cut the hand that feeds. But id go if i was in his spot and just not say anything to my employer.



DING DING DING

VinnyDz28 03-23-2012 09:57 AM

Youve made youre point snowking... ANYWAYS
I think you guys are right about the heads :( i dont feel like ripping her apart again. She still goes like hell though so ill wAit a little while before i Put other heads on

SLP IROC-Z 03-23-2012 12:20 PM

i have some real nice stock 853s ill sell ya ;)

VinnyDz28 03-23-2012 12:29 PM

Haha no im all good i have some too ;)

Slowhawk 03-23-2012 01:18 PM

Well, atleast you see the heads as an issue.

Within time you guy's will learn what works and not. Getting exited about 450rwhp out of a stock car with a STS just shows you guy's are starting out in this game. We played with the STS's back in 03/04.

As for future blower ect. There is no worries on high compression and boost. A stock H/C car with 11.4-1 compression and 10lbs of boost is a norm around here.

VinnyDz28 03-23-2012 02:29 PM

Yeah i would just need to do arp head studs so i dont blow the heads off the block. Fred told me i shouldve gotten 5.3 heads but it was too late lol. Its fine 390 rwhp is still nothing to sneeze at and im Proud i did it all myself :)

holokosta 03-23-2012 03:05 PM

Quote:

Originally Posted by VinnyDz28 (Post 64795)
Yeah i would just need to do arp head studs so i dont blow the heads off the block. Fred told me i shouldve gotten 5.3 heads but it was too late lol. Its fine 390 rwhp is still nothing to sneeze at and im Proud i did it all myself :)

As you should be those are some pretty good numbers man.

VinnyDz28 03-23-2012 05:43 PM

Quote:

Originally Posted by holokosta (Post 64798)
As you should be those are some pretty good numbers man.

Thanks :) but by nature ill always want more power haha

holokosta 03-23-2012 06:03 PM

Completely understandable haha. I saw you in Franklin about a month go actually in 140 in the center. I was in my dd so fuckin with you woulda been a lost cause ha. Your license plate gives a lot a way.

VinnyDz28 03-23-2012 06:06 PM

Hahah thats funny. Yeah everyone knows its me :p

KLAB 03-24-2012 12:02 AM

i bet that 390hp blew the welds off your intake thats why it made less.

on a serious note you learn through experience sounds like you had a good route planned and it didn't work out happens to all of us. I had my car painted by my body shop I worked at who did good work and it came out like shit. never again. have the skilled person work on your shit when you dont know how to do it yourself helping out your business all while getting discounted isnt the best sometimes.

either way it sounds like its running pretty good just drive it and some day when you boost it get some better heads and sell those.

VinnyDz28 03-24-2012 12:10 AM

As far as tuning yeah i dont know what im doing but i know i built it right lol. We're gonna dyno it next week when its cooler and see what happens

KLAB 03-24-2012 12:31 AM

no the heads live and learn next time maybe youll get them done by a better porter ???

you built it right but with wrong heads it sounds well not wrong heads but bad porting from what im reading ???

Formula413 03-24-2012 12:38 AM

I think the key thing to remember here is that you said the car goes like hell, in the end isn't that a lot more important than numbers on a piece of paper? My car makes 245 rwhp but it still puts a smile on my face every time I lay into it.

KLAB 03-24-2012 12:45 AM

Quote:

Originally Posted by Formula413 (Post 64827)
I think the key thing to remember here is that you said the car goes like hell, in the end isn't that a lot more important than numbers on a piece of paper? My car makes 245 rwhp but it still puts a smile on my face every time a lay into it.

QFT!!! thats all that really matters.

VinnyDz28 03-24-2012 12:29 PM

yeah you're definitely right. dyno numbers are just a tuning tool. how the car drives and goes down the track is the real test. I love my car and I'm proud of it and it definitely puts a smile on my face every single day :)

84ta406 03-24-2012 12:42 PM

Quote:

Originally Posted by Formula413 (Post 64827)
I think the key thing to remember here is that you said the car goes like hell, in the end isn't that a lot more important than numbers on a piece of paper? My car makes 245 rwhp but it still puts a smile on my face every time I lay into it.

Smiles Per Gallon

VinnyDz28 03-24-2012 06:33 PM

Quote:

Originally Posted by 84ta406 (Post 64845)
Smiles Per Gallon

That's how I look at it lol. I don't really stress about gas anymore. I figure I'm gonna have to pay for it no matter what, so I might as well get as much joy as I can out of each mile :)

holokosta 03-24-2012 08:23 PM

Quote:

Originally Posted by VinnyDz28 (Post 64854)
That's how I look at it lol. I don't really stress about gas anymore. I figure I'm gonna have to pay for it no matter what, so I might as well get as much joy as I can out of each mile :)

Exactly the mentality I keep about gas

VinnyDz28 03-25-2012 03:36 PM

Yup haha I certainly didn't build the car to get good gas mileage... :p


All times are GMT. The time now is 08:57 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.