North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Need to replace my A/C compressor (http://www.northeastf-bodyassn.com/showthread.php?t=1575)

ILuvPizzaTimes10 08-14-2010 03:46 AM

Debatable. I say why waiste the money. They warrantee a compressor as long as you buy a reciever dryer. New one will absorb all moister. I wouldn't worry about it man.

Formula413 08-14-2010 03:49 PM

Would it still be a good idea to have it recharged at a shop as opposed to buying the cans at the parts store?

BrokenFeather78 08-15-2010 01:38 AM

I would take it to a shop. They have a proper setup not a craptastic gauge that's reading lo side pressure.

Formula413 08-15-2010 06:05 AM

Step one of course is to see if I can turn up a working used compressor so I don't have to drop $235 on a brand new one.

ILuvPizzaTimes10 08-15-2010 12:48 PM

that is probably the worst idea you've had so far.

Formula413 08-15-2010 03:28 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 27202)
that is probably the worst idea you've had so far.

Can you add anything useful to that?

ILuvPizzaTimes10 08-15-2010 03:53 PM

how are you goin to be sure of the condition of a used compressor. is it going to fail in a week a month a year you cant tell. and by the time you know it 3 used ones later you could have had a new one installed. spend your money once.

Formula413 08-03-2011 08:43 PM

Update: This is turning into a serious PITA. I have put two different compressors on the car, both brand new (not reman), different brands, and they both had squeaking pulleys. The stock compressor makes no noise at all, and I had it back on the car in between these two, and no noise. Anyone have any thoughts on what could cause this? Serpentine belt is new. Both pulleys spun freely and made no noise off the car. This is getting aggravating and I really need to figure out a solution.

941LE 08-03-2011 09:23 PM

did you have dye put throw it to see any if there were any leaks?

frankzlt1 08-04-2011 01:14 AM

Did u check the tensioner pulley or idler pulley the sound could travel and make a different part sound bad sometimes


All times are GMT. The time now is 08:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.