lt1 alum heads,weld pro stars,4l60e,10blt & brakes,headers,hyd roller cam,camaro crap
 

1. Aluminum lt1 heads of 94 z28 150$ unsure how many miles are on the heads..i can tell you the car had 152k on it.They are stock from my knowledge,comes with valve covers and stock rockers.came off running motor

2. Doug herbert hyd roller cam..has less then 5k for miles on it..came out of just a street car heres the specs 125$.is for leter model block with retianing plate
hyd roller
adv 270 int 284 exh
@50 242 int 244 exh
lift .567/.585 with 1.5 rr
lobe 110
center line 104

3. 4l60e trans out my 94 z28 with stock stall true millage unknown chassis had 152k on it total though 250$

4. 10 bolt rear with disk brakes out my 94 z28 with 2.73 gears same as above 150$


5. Brand new pace setter headers 1 3/4 with 3" collectors..never even bolted on or mocked up on car..reg painted version 200$

6. Weld pro star rims 15x8" 4.75 chevy bolt pattern with 5.25 back spacing..will fit 4th/3rd gen an g body..comes with 1 center cap 200$

7. Camaro parts off my 94 z28
doors 100$
hood 75$
rear hatch with glass 75$
bumper covers 75$


Thanks
Tony
413-519-6268

let me ad ill trade some parts for some weld pro star 15x10 4.5 bolt pattern with 6.5 back spacing

headers
 

are they smog or racing headers

:tard::tard::tard::tard:

Hey man I think I'm gonna pass on the cam. Dont think the newer style cam will work with my block.

no prob and the headers are what they call racing..no smog shit

bolt pattern is the same and a standard/retro fit cam gear will bolt on. as long as you run a cam bushing/bearing and a button setup it will work. i know lunati sells a kit to run a "factory" roller cam on classic SBC. Just a heads up

^yes they do..its a retro kit if i remember right..i will say im not fimiler with hyd rollers..i have always just tossed solid rollers in my shit

I already have retro fit roller lifters, and a cam button. Is that all I need?

you need a smaller diameter front cam bushing/bearing because of the necked down front cam lobe. and your done.

left cam is the herbert hyd late model roller,right is my bullet roller..you can see the diff

http://sphotos.ak.fbcdn.net/hphotos-..._7409011_n.jpg

new price on heads....great set to send and have ported

whats the casting number on the heads. both AI and LE will only take certain castings to CNC

374's

will trade parts for 454 short block or just block and crank.

let me know

i have other stuff sbc stuff also..

I might be able to scratch some up for the heads!!! Need heads for LTx shortblock
Intake mani???

Any chance you need some autometer gauges?

no i dont..im pretty sure im going big block so

ill have alot of stuff for sale

stock lt1 short block <have to pull 1 snapped head bolt out,new arp's ill sale with it
electric water pump for it
brodix -10 heads for a lt1 flow 280..ill be putting them together next week..new .700 lift springs,new manely race valves an such.
brodix -8 heads ported an flow 315 cfm < sending to be fixed will be good as new(motor heads came off of had 8 track champion ships and milwalkee mile 1 lap track record)they have manely race master valves in them and i forgot the springs
holley strip dominator intake for reg sbc..needs porting paintied black
brand new bullet roller cam.
nos cheater plate,noids an 10lb bottle for 4150
fel-pro 1094 .015 shim gaskets
cloyes hex adj timing set with 9 way crank key..missing the adjuster
quick fuel black 140gph fuel pump.


plus what i have in this thread..lol

headers
 

PM sent

heads sold

Are you selling just two rear 15x8" pro stars or fronts too?

it was just the 2 rears..but they are sold along with cam an headers an the 1.5's might be gone this weekend.

fuck... I wanted the rears for 200 lol

sorry..i would of rather sold them local to..

I probably would have come to get them for 200