North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   UD Pulley? (http://www.northeastf-bodyassn.com/showthread.php?t=2930)

midnight 06-07-2011 03:28 PM

UD Pulley?
 
yay or nay? how do you guys feel about em? figure itd help me pick up a few ponies.

black heartbeat 06-07-2011 06:06 PM

i've heard they don't help because they make your alternator full field itself and you just end up going through alternators like crazy in order to compensate for it you need to change your crank pulley and by that time you have gained no power. Just what I've heard tho

ILuvPizzaTimes10 06-07-2011 08:47 PM

thats LT1's with shitty alternators!!!

Great bolt on as well as an EWP. mostly for cooling off in the staging lanes.

midnight 06-07-2011 09:00 PM

so the UD pulley is more for cooling or you talking about the water pump, im lost. I thought it free'd up some power otherwise being sucked through to the alt and shizz

My84Z 06-07-2011 09:30 PM

It's a good mod

ILuvPizzaTimes10 06-07-2011 09:43 PM

Quote:

Originally Posted by midnight (Post 49765)
so the UD pulley is more for cooling or you talking about the water pump, im lost. I thought it free'd up some power otherwise being sucked through to the alt and shizz


water pump for cooling.... obviously. and the UD pulley for some parasthetic losses in the rotating assy. up front. thats better?:ahhhhhhh:

Batman 06-07-2011 10:50 PM

I think it is a waste of money personally. Also know alot of people who have had problems with less expensive pulleys walking off the crank, cracking and warping. If you are hell bent on doing it I'd get the ATI but personally I think you could spend money in better places. The LS1 already revs really fast and the HP gain isn't all that noticeable. Up to you but I wouldn't waste the cash, you will see no real gain from it IMO.

DemonWithin99 06-07-2011 11:01 PM

spend the extra coin on the driver mod that makes it possible to laugh in the face of an owner of anything SVT... lol

ZFreie 06-07-2011 11:58 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 49762)
thats LT1's with shitty alternators!!!

Great bolt on as well as an EWP. mostly for cooling off in the staging lanes.

Cause you can shut your car off and keep the pump and fans on with switches?

midnight 06-08-2011 12:01 AM

Quote:

Originally Posted by Batman (Post 49783)
I think it is a waste of money personally. Also know alot of people who have had problems with less expensive pulleys walking off the crank, cracking and warping. If you are hell bent on doing it I'd get the ATI but personally I think you could spend money in better places. The LS1 already revs really fast and the HP gain isn't all that noticeable. Up to you but I wouldn't waste the cash, you will see no real gain from it IMO.

what would you recommend instead?

heads are a little out of my price range right now..unless i do the truck head upgrade and find those for a good price..but i was browsing about them on LS1 tech saying its not really a great mod

ILuvPizzaTimes10 06-08-2011 12:02 AM

Yes. my car drops 100 degrees in a minute with the key on and engine off.

Ohh and its a very good mod the UD Pulley. unless you like burning up alternators and power steering pumps at 6000+rpm shift. and its required to have an SFI Damper if the motor spins past 6500 rpm also. they Dont check for it or ask in tech at NED but i have gotten asked at Atco.

ZFreie 06-08-2011 12:05 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 49797)
Yes. my car drops 100 degrees in a minute with the key on and engine off.

Rodger, just making sure my thoughts were correct.

smokinss 06-08-2011 12:29 AM

I did the summit under drive on my car when I changed the cam 2nd time around. Nice piece and is sfi rated too. I guess it helped out a little bit.

Batman 06-08-2011 11:12 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 49797)
Yes. my car drops 100 degrees in a minute with the key on and engine off.

Ohh and its a very good mod the UD Pulley. unless you like burning up alternators and power steering pumps at 6000+rpm shift. and its required to have an SFI Damper if the motor spins past 6500 rpm also. they Dont check for it or ask in tech at NED but i have gotten asked at Atco.

What mods do you have Midnight? And I don't see him going past 6500 in any meaningful way if he has stock internals. I'm just saying from experience ( I had an SLP pulley for a little while) for the ridiculous money you are going to pay for one you get next to nothing. You would see more on a SBC or an LT1. I shifted at 6750 and never had a problem with an alternator or PS pump or slipping belts.

Back on topic, Midnight, I'd be looking into suspension mods if they haven;t been done since most underdrive pulleys are at least halfway to the price of a torque arm (SFI rated one probably cost more than a torque arm). That is if you actually want to go faster and not just make 2 more RWH on the dyno.

midnight 06-08-2011 03:10 PM

Quote:

Originally Posted by Batman (Post 49830)
What mods do you have Midnight? And I don't see him going past 6500 in any meaningful way if he has stock internals. I'm just saying from experience ( I had an SLP pulley for a little while) for the ridiculous money you are going to pay for one you get next to nothing. You would see more on a SBC or an LT1. I shifted at 6750 and never had a problem with an alternator or PS pump or slipping belts.

Back on topic, Midnight, I'd be looking into suspension mods if they haven;t been done since most underdrive pulleys are at least halfway to the price of a torque arm (SFI rated one probably cost more than a torque arm). That is if you actually want to go faster and not just make 2 more RWH on the dyno.

lol faster works, thats the ultimate goal. so do they benefit even though im not having traction issues? I was surprised at how well the tires hold up on the street (cant get the thing sideways unless i dump it then cut the wheel lol) and at the track im DEFINITELY not having traction issues. Im assuming that they limit any sort of engine/transmission movement and throw the power to the wheels quicker?

ILuvPizzaTimes10 06-08-2011 03:43 PM

cars are running mid low 10's on stock suspension. you are Not traction limited. you need to learn how to drive. Now an under drive pulley and Electric water pump do help. Mr. I Know It all thinks not for whatever reason. it helps the engine alot more up top then anything. is it going to drop 2 mph? No. efficiency is the goal with those two mods. Now get your driving down and you wont be looking at adding more power cuz the car will be fast. if your looking to go faster by adding more parts thats just dumb and you will be in a worse boat with a CAR THAT NOW wONT HOOK AND YOU STILL CANT SHIFT,

midnight 06-08-2011 04:11 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 49839)
cars are running mid low 10's on stock suspension. you are Not traction limited. you need to learn how to drive. Now an under drive pulley and Electric water pump do help. Mr. I Know It all thinks not for whatever reason. it helps the engine alot more up top then anything. is it going to drop 2 mph? No. efficiency is the goal with those two mods. Now get your driving down and you wont be looking at adding more power cuz the car will be fast. if your looking to go faster by adding more parts thats just dumb and you will be in a worse boat with a CAR THAT NOW wONT HOOK AND YOU STILL CANT SHIFT,

im not talking about modifications from a "going faster down the track" stand point. SOTP feel and moving around on the street is mainly what the car does, the track is a secondary concern. I know the problems i have at the track are related to me and not needing modification, but i shouldnt have to tell you that they are two different worlds

Batman 06-08-2011 08:59 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 49839)
cars are running mid low 10's on stock suspension. you are Not traction limited.

You can go 10's on a stock rear axle too, doesn't make it smart. Do what you want Mike, Pizza has obviously had more LS1's with underdrive pulleys (once again) than I have. I'm tired of arguing with him and won't stoop to his level anymore. When you break the mount or the tailshaft on your transmission at least you will have 2 extra HP at 7000 RPM and a better SOTP feeling.

thesilverone 06-08-2011 09:18 PM

putting the car on a diet would always help

midnight 06-08-2011 10:11 PM

Quote:

Originally Posted by Batman (Post 49887)
You can go 10's on a stock rear axle too, doesn't make it smart. Do what you want Mike, Pizza has obviously had more LS1's with underdrive pulleys (once again) than I have. I'm tired of arguing with him and won't stoop to his level anymore. When you break the mount or the tailshaft on your transmission at least you will have 2 extra HP at 7000 RPM and a better SOTP feeling.

i like how i get thrown into this....i ask question about your suggestion and that immediately means im not listening or putting down someones opinion. Guess i should just make my own decisions and learn from my mistakes cuz me asking opinions obviously upsets others?:sFun_bananacolors:

My84Z 06-09-2011 02:15 AM

Quote:

Originally Posted by Batman (Post 49887)
You can go 10's on a stock rear axle too, doesn't make it smart. Do what you want Mike, Pizza has obviously had more LS1's with underdrive pulleys (once again) than I have. I'm tired of arguing with him and won't stoop to his level anymore. When you break the mount or the tailshaft on your transmission at least you will have 2 extra HP at 7000 RPM and a better SOTP feeling.

I shift at 6600 people with big cams shift at 7000 which is about the limit on the stock bottom end. People have gained 10 rwhp with a underdrive pulley however where you really gain is it spins rpms faster from parasitic loss. You keep saying your experience and this and that but you also put stock manifolds and cats on your car and it made what most cam only cars make and also putting exhaust restrictions can't be good for rings etc... just saying. Mike Yes it is a good mod for a couple ponies and as stated it is technically a requirement on safety. I think you would gain more from seat time and some sort of measuring device to measure your shifts wether you want a tach or just a light.

midnight 06-09-2011 02:35 AM

Quote:

Originally Posted by My84Z (Post 49960)
I shift at 6600 people with big cams shift at 7000 which is about the limit on the stock bottom end. People have gained 10 rwhp with a underdrive pulley however where you really gain is it spins rpms faster from parasitic loss. You keep saying your experience and this and that but you also put stock manifolds and cats on your car and it made what most cam only cars make and also putting exhaust restrictions can't be good for rings etc... just saying. Mike Yes it is a good mod for a couple ponies and as stated it is technically a requirement on safety. I think you would gain more from seat time and some sort of measuring device to measure your shifts wether you want a tach or just a light.

As i stated, i know me being slow in the quarter is me. lol just looking to have a little more fun with the car

My84Z 06-09-2011 03:04 AM

Then yes it is a decent mod

SLP IROC-Z 06-09-2011 03:27 AM

take the damn serp belt right off!

*LS1* Queen 06-09-2011 03:51 AM

LOLz

DemonWithin99 06-09-2011 05:21 AM

go on a diet and grow a bigger foot... problem solved.

ZFreie 06-09-2011 05:48 AM

Quote:

Originally Posted by DemonWithin99 (Post 49975)
go on a diet and grow a bigger foot... problem solved.

Hell yea, my car is on a crash course diet! Go fast smart!

midnight 06-09-2011 03:25 PM

i could just hire a tiny asian with a board strapped to his foot then! the ultimate "Driver Mod"

but ya seriously, no

KLAB 07-29-2011 07:57 PM

I could be your 140lb driver mod!

:klab:

My84Z 07-30-2011 03:57 AM

If u could drive.... Or ever felt powah!

KLAB 08-01-2011 05:04 PM

Oh but I can drive I can....


All times are GMT. The time now is 06:28 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.