North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Competition Engineering Roll Bar Kit (http://www.northeastf-bodyassn.com/showthread.php?t=3630)

ILuvPizzaTimes10 01-07-2012 06:06 PM

Competition Engineering Roll Bar Kit
 
Who's used one? or better yet seen one installed?

http://www.summitracing.com/parts/CEE-3131-K/

Pretty Fucking Sick for only 200 Bux!!!! But if its a piece then why bother!!

i just know its better then the wolf with the speaker hole rear struts!!:gayfight::sFun_crazydance:

SLP IROC-Z 01-07-2012 07:12 PM

check out S&W as well.

941LE 01-07-2012 08:54 PM

You plan on going that fast with frankinstien?

ILuvPizzaTimes10 01-07-2012 11:43 PM

well i dunno wen BUT NHRA Rules do state anything faster then 11.99 needs a roll cage. wen NED enforces it i dont wanna get kicked out for running a measly 11.7 at best. Yah Knoq.

My84Z 01-08-2012 12:05 AM

For what i paid i would rather have halls do it then deal with all the cutting welding etc

Motaboata 01-08-2012 12:12 AM

what did u pay halls?

My84Z 01-08-2012 12:23 AM

900 no swingouts moly

Motaboata 01-08-2012 12:39 AM

idk call me cheap but rather spend the 200 and weld it in myself.... im poor lol...

My84Z 01-08-2012 12:47 AM

First off you need a welder and a way to notch and cut bars . Then you would need to be able to get it to fit nice and be welded nice. I believe Pizza could but not you haha plus when you add up shipping and hours it takes to put it in savings are low

Slowhawk 01-08-2012 01:27 AM

If you do all your own work it might be worth it if you have alot of time/tools to do it.

If you plan on paying for the welding/someone else to put it in you can't beat a chromoly from Halls.

84ta406 01-08-2012 12:57 PM

Dont forget theres actual rules stating where the door bars have to go down etc. I dont feel like looking them all up myself.

At 11.99 dont you need a "roll bar" Those are simple, once you get past 6pts I'm all set doing the work. Dont forget the welds "shoulds" have to pass inspection etc.

ILuvPizzaTimes10 01-08-2012 04:16 PM

it states the latest rules that a standard 4 point.(main hoop and 2 rear struts) are not legal. you need the 5th point. the drivers door bar. the door bar Can be swing out. and its doesnt state whether it can be slung/bent or not. So if it doesnt say you cant then you can. it just needs to be in the right location in relation to the drivers shoulder. and John as far as that kit goes All the pieces are pre-beveled wich is why i was really looking into it. and with the mild steel the welder at work will do Just fine. Miller-Matic 250 with a spool gun!!! So thats why i wanted to know if it was really worth it? cuz doing the work myself it will be Simple and Easy for the 5 point. and its good to 10.00!

KLAB 01-10-2012 05:51 PM

I would go this route if you have the skills / tools of course!

ILuvPizzaTimes10 01-11-2012 12:39 AM

ohh and No on the S&W. they have the rear struts going threw the speaker holes. Fuck that.

Motaboata 03-30-2012 07:06 PM

So I went to order this....

1 comp engineering doesn't make this kit anymore.
2. They are charging this price just for the hoop now
3. Extra 350 for the strut kit with plates...

Just an FYI

My84Z 03-30-2012 10:49 PM

step 1 remove interior step 2 deliever to halls step 3 paint step 4 put interior back in.

ILuvPizzaTimes10 03-30-2012 11:20 PM

If comp doesn't make it then why does summit offer it and say ship today?

http://m.summitracing.com/parts/CEE-3121-K

Motaboata 03-31-2012 06:53 AM

Mike that is a great question... In the process of figuring it out

Camaro9969 03-31-2012 12:14 PM

Ya thats cheap but its thick heavy steel, go chromoly its not much more.............Once my car is all done my buddy could hook you up with the welding. Hes a great welder and i'm sure would give you a great deal.

c4boom 03-31-2012 03:28 PM

fuckers going to make me put a cage in my car :( whats the deal with the bolt in cage yay or nay

My84Z 03-31-2012 04:29 PM

Boomer after that accident I would do a weld in before drag racing to keep it straight and true.

Bowtie Babe 03-31-2012 09:54 PM

Quote:

Originally Posted by My84Z (Post 65412)
step 1 remove interior step 2 deliever to halls step 3 paint step 4 put interior back in.

Have your wife or significant other complete step 3 apparently!!

My84Z 03-31-2012 10:37 PM

Definately cause painting sucks!


All times are GMT. The time now is 06:20 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.