North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Pictures/Videos (http://www.northeastf-bodyassn.com/forumdisplay.php?f=12)
-   -   New Partssss!!!!! (http://www.northeastf-bodyassn.com/showthread.php?t=3779)

ILuvPizzaTimes10 02-17-2012 09:55 PM

New Partssss!!!!!
 
WOOHOOOO!!! Patriot Performance Freedom Series LT1 heads. they are 195cc runner. larger then my current 170cc runners. combustion chamber "as Cast is 64cc. Lloyd Elliot is going to be getting these to open them up a little more. out of the box they flow about 250/170. wen hes done he expects 280+/190+. Huge improvement over my heads now which are 265/190.

http://i725.photobucket.com/albums/w...0217163729.jpg

http://i725.photobucket.com/albums/w...0217163448.jpg

http://i725.photobucket.com/albums/w...0217163440.jpg

http://i725.photobucket.com/albums/w...0217163431.jpg

http://i725.photobucket.com/albums/w...0217163415.jpg

http://i725.photobucket.com/albums/w...0217163356.jpg

Cell Phone Pics But you get the idea. the port even tappered are larger then the stock ports and almost too big for stock GM and the bigger Felpro Gaskets. Intake will also be sent out and ported to match the heads! we should see how she turns out!!!!

irockidz28 02-17-2012 09:59 PM

nice man! its about time you upgraded those!

black heartbeat 02-17-2012 10:01 PM

finally you're going to have some good heads on that thing!

Formula413 02-17-2012 10:06 PM

I didn't even know Patriot did LT1 heads, I'd heard of their LS1 heads. Looking forward to seeing what all those cubes can really do.

irockidz28 02-17-2012 10:07 PM

400????

SLP IROC-Z 02-17-2012 10:29 PM

damn it now i probably wont be able to beat you! i will have to pull a plug wire off when you arent looking.

84ta406 02-17-2012 10:31 PM

Nice man, what do you expect to see, 40+ gain?

98 hoe 02-17-2012 11:23 PM

Just install the springs correct on this set ok no more excuses. Ha ha they look good man good luck with them hope to hear it run soon

BadBird505 02-17-2012 11:26 PM

very nice!

*LS1* Queen 02-17-2012 11:48 PM

bout damn time!!!!

My84Z 02-17-2012 11:49 PM

Shiney! Now lets see you stop being a bitch and get to the track :P

ILuvPizzaTimes10 02-18-2012 12:26 AM

Hahaha will do!!^^^ And the heads I have make greatttt numbers for a stock head. The whole down fall to my setup is the 396 is really expected to make more. But the heads I have on a 350 with a mild cam would be an awesome sreet strip 12 sec setup. But I built this bitch for all out drag motor and it fell short. I've been looking for a great pair of heads I could afford. These hopefully will be them.

Quote:

Originally Posted by irockidz28 (Post 62189)
400????



I also expect over 400rwhp its what it makes now. I would like to see 440/450 and run consistant 11.5's in the heat. That's my goal!!

ls6monte 02-18-2012 12:32 AM

Heads up Bitch!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


:madfu: :madfu: :madfu: :madfu:

ILuvPizzaTimes10 02-18-2012 12:35 AM

No problem. You ran what 11.7's in the good weather? Seems a good race! Tony is no longer a good race!! Finally!! Bolt on only bitch will be shut up!! For good...... who am I kidding.

SLP IROC-Z 02-18-2012 03:55 AM

i may have to do a cam ;)

My84Z 02-18-2012 04:10 AM

Let's not get ahead of ourselves

ILuvPizzaTimes10 02-18-2012 04:49 AM

Ohh? Knockin the lt1?

My84Z 02-18-2012 05:06 AM

I was posting in response to the post above but yes lt1's are gay

Formula413 02-18-2012 05:08 AM

I'm getting a Procharger cause I feel left out :(

SLP IROC-Z 02-18-2012 08:29 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 62223)
Ohh? Knockin the lt1?

im not sure he knows what he means

frankzlt1 02-18-2012 10:43 AM

verrrrryyyyyyy nice.

smokinss 02-18-2012 12:09 PM

Sweet pizza. Get that bitch running so I can give you shit again!!!

Slowhawk 02-18-2012 02:16 PM

Stop wasting your time and put a 6.0 in there already.

ILuvPizzaTimes10 02-18-2012 03:21 PM

shut up!!!!!!!!!!!!!!

quik95lt1 02-28-2012 02:17 PM

Quote:

Originally Posted by My84Z (Post 62225)
I was posting in response to the post above but yes lt1's are gay

oh yeh? :cool:

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 62245)
shut up!!!!!!!!!!!!!!

lol........glad to see ur finally getting a decent top end on that motor mike.......now just swap out that bump stick and youll be in good shape!!

ILuvPizzaTimes10 02-28-2012 03:28 PM

Yeah we'll see what lloyd sez about the heads on this cam after they are done. All depends how they turn out before I go and buy something. I'm thinking something still hyd in the mid 6's lift. But duration and lsa are key and lloyd would know better then me on that one.

quik95lt1 02-28-2012 03:36 PM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 62829)
Yeah we'll see what lloyd sez about the heads on this cam after they are done. All depends how they turn out before I go and buy something. I'm thinking something still hyd in the mid 6's lift. But duration and lsa are key and lloyd would know better then me on that one.

yea really depends on how those heads come out and what you can rev it.....i just did a 383 with LE2 stockers running a 240/248 .610/.630 112+2 in it should be in the 7000-7100rpm shift area....was shooting right at the edge of the stock LT1 PCM limit hoping for 450ish rwhp......before we turn on the giggily gas :devil:


All times are GMT. The time now is 12:47 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.