Hood struts after hood swap??
I'm going to get the silver car in the next couple of days and probably gonna test fit the SS hood. Just wondering going from the heavy steel hood to super light floppy fiberglass do I have to get different hood struts? If so where do you get em? I heard of people cracking hoods because the struts were too stiff on different cars but maybe its negligible...
|
remove one strut, itll be fine.
|
vfn makes lightweight struts i think they are like 40 bucks if i can remember correctly...i would not recommend the one strut as ud see on mine it eventually made one corner of the hood sit up higher
|
i used the stock ones and had no issue
|
Either stock worn out ones or one strut as joe sed. It will be fine.
|
apparently someone that actually has done the one strut and told u its not a good ideais wrong lol i know i have tits so i dont know what im talking about
|
People have used one strut for years and its not personal just what I have seen to work. It might be the strut that pushed your hood.
|
Quote:
|
Lmao. I'll Getty two in the junk yard that are toast if I can find any
|
wouldnt waste your time, just use one.
|
It seems like using one would put more force in one side and twist it loll
|
it does put more weight to one side hence why mine bows up on the drivers side now..i even switched them around and then the other side bowed up lol...either way do not use both stock ones..id really just invest in the vfn ones and not have to worry bout anything
|
Quote:
i have a glasstek hood with two stock hood struts, with this theory looking at the front of my car the hood should be shaped light a U and its not. |
While on the topic of hoods...
Question, if one were to use a pin on hood, and removed the hinges and struts, would you just run a second set on pins in the back to keep it stable at speed or in the event of a crash? |
you would have to run atleast two sets of pins. or dezus rails.
|
lol this is amusing..someone that knows what one strut does is still arguing the fact...go ahead use 2 stock ones which on the SS were 52lbs of pressure and the Z28 was 78lbs and see what happens. u want to risk cracking the fiberglass, causing dimples or using one strut that causes the hood to sit uneven go for it...u might not have as much of an issue with the one strut as i do cause the hood is prob a little heavier than mine but im just going thru my own experiences with this(mine sitting uneven and having a dimple in it.) People argue about this shit all the time but until u actually deal with the issue of having ur hood get fucked up then u have no place to talk imo. And there are also other lightweight struts u can get around 20-25lbs out there...Hell id even try to find at least some worn out SS ones at a junkyard or something...at least its less stress on the hood.. and its not about when the hoods closed...its the force in which it opens and closes that causes the problem
|
and im just speaking from MY experience to. Just because your issue happened doesnt mean anything will happen to kevins. i used both struts on my SS hood. Worked fine and never had a issue with it slamming it closed. Hell maybe joe and mike have had good luck with their suggestion too. WTF does it matter to you if your opinion gets over looked. you stated it, made it known. Fucking move on. its a opinion no one has to listen to it.
|
Lol my threads are sooooo dramatic. my Hood is light as snit that's why I'm asking maybe their hoops are heavier than you're or something but thanks for both sides of opinions on this I'll keep it in mind Maddie. I suppose I'll try both two at first and see how it feels and if its to stiff I'll take one off.
|
And of course I feel uneven stress I'll get some lighter struts
I think I have to get it painted before anything doe mang :klab: |
I wouldn't run amy if your worried about it and just keep a prop in the car
|
Quote:
|
Broomstick FTW :haha:
|
Quote:
|
Quote:
|
dear gawd
|
Enough!!!!!
|
golly.... i vote broomstick mod ftw
|
Quit crying over spilt milk! O wahhhh no one is listening to me. Get over it
|
This is awesome. Just sayin.
|
Quote:
|
Quote:
|
| All times are GMT. The time now is 10:19 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.