North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Lost power with LS6 intake? (http://www.northeastf-bodyassn.com/showthread.php?t=3914)

VinnyDz28 03-22-2012 06:53 PM

Lost power with LS6 intake?
 
Got retuned yesterday with LS6 intake and lost 3 hp and 3 ft lbs how is this possible? Afr and timing are mint and no vacuum leaks. No way i should make more power with the stock intake manifold

SLP IROC-Z 03-22-2012 07:43 PM

dyno numbers probably werent correct last time. sounds like a correction factor issue.

VinnyDz28 03-22-2012 07:48 PM

No way the correction factor has to be right i was making 334 before i did the engine work then after made 388 now i made 385 and theres no way thats all my car should be making with my mods

SLP IROC-Z 03-22-2012 07:55 PM

oh ok, sounds like you got it all figured out then.

VinnyDz28 03-22-2012 07:59 PM

I dont, im so frustrated. Me and fred are just baffled :(

KB93z28 03-22-2012 08:04 PM

WTF? That isnt right dude! Have you changed anything else since your dyno runs with the stock intake? Oh, I still have yet to see your car with all this work done to it, I wanna hear it roar haha

VinnyDz28 03-22-2012 08:07 PM

Nope just the manifold i just have shit ass luck.
Yeah we gotta meet up!

KB93z28 03-22-2012 08:09 PM

Nah, its not luck, you and Fred just might be over looking something stupidly simple, shit like that happens to me all the time haha.

Slowhawk 03-22-2012 08:10 PM

I would say something just isn't right. Even for a low hp car your numbers are way too low,even for my dyno.

First check would be tuning. I think it was said to be tuned full sd with no MAF? If true, that is absolutely not needed and could be the problem.

Second- work done to car. Cam degree'd right? Preload on the lifters correct?

That is a few things that come to mind.

VinnyDz28 03-22-2012 08:12 PM

Theres nothing man i have no idea unless my cam and heads just dont like that manifold?

KB93z28 03-22-2012 08:14 PM

Idk man, how much of a hassle would it be for you to go back to MAF?

VinnyDz28 03-22-2012 08:15 PM

Full retune and it wont do anything

Slowhawk 03-22-2012 08:16 PM

Quote:

Originally Posted by KB93z28 (Post 64660)
Idk man, how much of a hassle would it be for you to go back to MAF?



Should take 5-10 minutes to tune in and it will correct better.

KB93z28 03-22-2012 08:18 PM

I Know very little when it comes to ls1's so I wish I could offer some suggestions, but I know Don knows his shit.

VinnyDz28 03-22-2012 08:19 PM

Im just not understanding how itll change anything since my afr was spot on

VinnyDz28 03-22-2012 09:11 PM

I know it will correct better for different temperature and altitude conditions but it won't give me any more power... I feel like I'm the only person in the world that has put the LS6 manifold on their car and lost power, and it's really frustrating because I thought I would finally be over 400 whp

My84Z 03-22-2012 10:33 PM

1 get a maf 2 get another tuner cause your tuner should be able to see what's going on. Or 3 your cam is off a couple degrees

Slowhawk 03-22-2012 10:35 PM

Try knocking the timing down. From the tunes I've seen from the shop your ussing he always runs too much timing.

More timing never means more power.

VinnyDz28 03-22-2012 11:17 PM

My tuners great and my cam is dead on i timed it when i put it in

941LE 03-22-2012 11:42 PM

then obviously nothings wrong if you timed it perfectly and your tune is spot on.

VinnyDz28 03-22-2012 11:44 PM

Yeah i mean i definitely need injectors for sure i just dont get how i lost power with the ls6

SLP IROC-Z 03-23-2012 12:09 AM

werent your first dyno runs with this setup made when the air was alot cooler? its been pretty warm out the last few days, that will obviously affect your numbers. post up the graphs

VinnyDz28 03-23-2012 12:20 AM

Yeah it was like a 40 degree difference and it was humid yesterday.

My84Z 03-23-2012 12:34 AM

To me it's tune or valve spring issue cause your car is low for the mods. I am not saying your a/f isn't right but there is alot more to a tune then punching in a commanded af ratio

VinnyDz28 03-23-2012 12:38 AM

The car runs like a champ though and theyre brand new comp springs

Slowhawk 03-23-2012 12:44 AM

Who ported the heads?

VinnyDz28 03-23-2012 12:48 AM

abt in holliston. I just dont know how the ls1 intake made more power. Only thing it could be is temp i think

snowking 03-23-2012 12:54 AM

If you have all the answers why bother asking questions.

VinnyDz28 03-23-2012 12:57 AM

I know i feel bad lol but i just did the engine work 3000 miles ago and it dynod at 388 whp and 373 ft lbs then with the ls1 manifold. Blah :(

holokosta 03-23-2012 01:00 AM

Quote:

Originally Posted by snowking (Post 64711)
If you have all the answers why bother asking questions.

Because the point of the forum is to ask people their experience and expertise and opinion. Hes speculating if you haven't noticed the "might be" and the "I don't know..."

Not to sound like an asshole but that was kinda ignorant... I'm not that smart when it comes to these cars yet so alot of my knowledge comes from picking people's brains on here. He's just doin the same even though he more than likely knows a shit lOad more than i do already.

Slowhawk 03-23-2012 01:09 AM

I think what snowing was saying - don't fight ect when people give suggestions or ideas.
The intake didn't make power for a reason. The car does not need injectors at 390rwhp. Abt is not a good ls head porter. More than likely this is why the car was limited on power before and why it didn't gain with the intake.

So, if timing and fuel are on, it is what it is. Done

VinnyDz28 03-23-2012 01:10 AM

Quote:

Originally Posted by holokosta (Post 64713)
Because the point of the forum is to ask people their experience and expertise and opinion. Hes speculating if you haven't noticed the "might be" and the "I don't know..."

Not to sound like an asshole but that was kinda ignorant... I'm not that smart when it comes to these cars yet so alot of my knowledge comes from picking people's brains on here. He's just doin the same even though he more than likely knows a shit lOad more than i do already.

Thanks man. I know where hes coming from though, i just know my car lol i just finished building the damn thing and it goes like hell. I just dont see how after 2500 miles changing to the ls6 lost power

holokosta 03-23-2012 01:12 AM

I hear yah man. I know it was kinda critical but it just makes me feel like an ass when people respond like that because I count on a lot of people's info on here.

VinnyDz28 03-23-2012 01:13 AM

Quote:

Originally Posted by Slowhawk (Post 64714)
I think what snowing was saying - don't fight ect when people give suggestions or ideas.
The intake didn't make power for a reason. The car does not need injectors at 390rwhp. Abt is not a good ls head porter. More than likely this is why the car was limited on power before and why it didn't gain with the intake.

So, if timing and fuel are on, it is what it is. Done

I hear ya. I just thought those heads would be good for a bit more power. Maybe ill save up for a good set of heads and redo them.
Btw the injectors were at 100% duty cycle

holokosta 03-23-2012 01:19 AM

Oright fair enough I'll apologize and retract my previous statements then. I understand.

black heartbeat 03-23-2012 01:47 AM

I think theres a reason the intake isn't making more power...maybe you should investigate it and question things that may affect it.....that is all

Slowhawk 03-23-2012 01:55 AM

The injector duty cycle is a calculation from the tuning perameters. Stock injectors can handle 440-450 rwhp on a dyno jet. I just did a car that made 435rwhp on stock injectors. So, in other words the 100 percent duty cycle is false.

New heads would be needed because they are probly already hogged out in the wrong areas. We see this alot with ported heads.
I bet just switching to cheap tsp 5.3l 2.5 heads would put you past the 400 mark easilly.

Now you just got what you got. I see no problem with it.

VinnyDz28 03-23-2012 02:00 AM

Yeah i guess youre right. The heads must not be able to flow well enough. Id go with 5.3s but dont wanna bump up compression because i eventually wanna boost it. We have a bone stock besides rear mount turbo and injectors trans am pushing 450 rwhp with stock manifolds, intake, even EGR at SMG lol

ILuvPizzaTimes10 03-23-2012 02:05 AM

same problem i had. shit ton of mods and Crap ported heads. Ported doesnt always mean better. and i bet the better intake has stalled the air in the intake port. causing more problems then helping. i Still would stop by Dons. have him go over everything.

If i was going to Doctor A. and kept having the same issues and not getting the results i wanted id go see Doctor B. Just for a second opinion at Least!

TrickrTreat 03-23-2012 02:15 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 64728)
same problem i had. shit ton of mods and Crap ported heads. Ported doesnt always mean better. and i bet the better intake has stalled the air in the intake port. causing more problems then helping. i Still would stop by Dons. have him go over everything.

If i was going to Doctor A. and kept having the same issues and not getting the results i wanted id go see Doctor B. Just for a second opinion at Least!

Amen!


All times are GMT. The time now is 08:32 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.