GEN V Small Block
|
|
So it seems like its a LSx motor on crack lol Very interesting to say the least..
|
Dry sump is standard and revs to 6600rpm yeee haw
|
Chevrolet has released a deluge of information about the 2014 Corvette’s fifth-generation small block V8 - the LT1. Despite displacing the same 6.2 liters as the outgoing LS3 mill, the LT1 is 99.9 percent new and packed with significantly more power and technology than its predecessor.
The new small block churns out 450 horsepower at 6000 rpm and 450 lb-ft of torque at 4000 rpm, improvements of 20 ponies and 26 lb-ft over the LS3. Chevrolet says that output is enough to empower the C7 Corvette to sprint from zero-to-60 mph in under 4.0 seconds, and with over 400 lb-ft of twist on tap between 2,000 and 4,000 rpm, the LT1 also provides plenty of mid-range output. Though it retains the tried-and-true pushrod configuration, the LT1 features direct-injection, variable valve timing and a fairly high 11.5:1 compression ratio. A dry sump oil system will be an optional extra in place of a standard wet sump unit. Also part of the LT1 package is a cylinder deactivation system that saves fuel by effectively turning the 6.2-liter V8 into a 3.1-liter V4. Chevrolet says the system will help the LT1 better the less-powerful LS3's 26-mpg highway rating. No more laughing at the LT-1 name plate. |
we can still laugh at the old lt1 plate... or at least it's only weakness!! lol
|
I think it's a dumb ass design but they have to roll on it because they wasted so much money designing it.
lifters- very well known to fail already in current motors. variable timing control- lacking in control on current models direct inject- rule out alot of FI or heavy modding of the motor. hopefully the people buying these like the power they have because earlier years will be blowing by them with the work that can be done. Hope they atleast keep the LS3 as an option. |
YEA BUDDY!!! THE LT1 DECIMATES ALLLLLL!!!!!!!
|
11.5 to 1 cr and direct injection looks like no blowers or turbos
|
I know theyre not direct injected but the new Ford 5.0s have 11.5:1 CR as well.. I would think with the DI you could boost it easier no?
|
Compression is compression i guess it would depend on scr but either way 11.5:1 you can't boost much without methanol or race gas
|
Looks like they already thought about that http://www.corvetteonline.com/news/v...g-twin-turbos/
|
The new 5.0's make STUPID power with the bolt on Prochargers too with that CR
|
Spray....problem solved.
|
Quote:
|
Ehh not thrilled about it. Will be interesting to see how it holds up to mods
|
The computer is going to come locked and will need to be cracked apparently. They say it will be harder to crack now.
|
You can put a blower on the high compression no problem.
The computer will get cracked easilly. GM works with the tuning company's to tune them.- GM wants you to modify there car and beat up fords/dodges ect. They just don't want to warrenty it after.Rightfully so. The gas mileage now gets killed by the damn EPA. They keep the emissions better by having the vehicles use more gas but burn it more efficiently. |
|
Quote:
|
So your telling me, when I tell people I have an LT1 they'll think I have the C7 engine?
|
hahaha No they wont.
And i think they will be able to open up those injects the same as they do on the diesels. and there will be aftermarket for them. just not right away. i dont like the idea of this project they waisted millions on. but again like everyone else has sed time will tell. |
| All times are GMT. The time now is 10:19 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.