North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Fourth Generation (http://www.northeastf-bodyassn.com/forumdisplay.php?f=16)
-   -   Need to replace my A/C compressor (http://www.northeastf-bodyassn.com/showthread.php?t=1575)

Formula413 08-11-2010 02:11 AM

Need to replace my A/C compressor
 
Has anyone ever replaced an A/C compressor on an LT1? Mine is leaking, just want to know how difficult it is before I dive into it.

irockidz28 08-11-2010 02:20 AM

i did one on a TPI like 4 days ago took like 10 mins but i have way more room then you do but i f*cked mine up now it wont turn on and the blower fan doesnt work idk what i did but good luck with it lol

Greenbird94ta 08-11-2010 02:59 AM

it's kinda a pain in the dick, you have to take the acc. bracket off, to get to it, then u have to get the back bolts off that bolt the lines to the back of the compressor as well, and that bolt sucks. good luck man. mine was all fucked up so i ended up cutting it off lol

ILuvPizzaTimes10 08-11-2010 02:23 PM

I won't say there easy but there not super tough. You don't need to remove the acc bracket if you have access to a lift and the back bolts are easiest to get to by renoving the starter and going in from the backside. Good luck. LT1=Fail

Formula413 08-11-2010 11:34 PM

I'll almost certainly be doing it without a lift, so if I need to pull the accessory bracket so be it. Also, my Haynes manual says you hafta replace the receiver/dryer at the same time, is that absolutely necessary, even if I'm just putting in a used compressor?

ILuvPizzaTimes10 08-12-2010 02:29 AM

Why is the compressor bad? If its internal and sendind metal threw the system the reciever dryer is what will hold that metal and kill the new/used compressor id change it for sure!

Formula413 08-12-2010 02:41 AM

The only thing wrong with the compressor is that it's leaking. If I recharge the system the A/C blows cold again until the refrigerant leaks out again. So I have no reason to suspect internal damage.

ILuvPizzaTimes10 08-12-2010 03:15 AM

Everytime you refill it are you using oil. And if so do you vac out the old and filling it with the proper amount of oil each time? If you aren't doing all of the above on every fill you are most certainly hurting the compressor. Wich in turn will leave fillings and build up behind. Would you change the oil in your car and leave the old oil filter in the car?

KLAB 08-12-2010 04:39 AM

Alex all you need is time and tools. I did mine in 2008 when I got the car with the nose about a foot or a lil more off the ground and laying in the dirt. I'd say just go in there and start loosening up all the shit around it to make it easier. I just started taking things off and then I was like "oooooooh sooo thats where the bolts are...." Mine was seized up so I got a new one. Hell yes for A/C <3 :klab:

941LE 08-12-2010 12:10 PM

take the tops off. problem fixed


All times are GMT. The time now is 06:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.