North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Lounge (http://www.northeastf-bodyassn.com/forumdisplay.php?f=2)
-   -   HELP!!!!!!!!! (http://www.northeastf-bodyassn.com/showthread.php?t=3657)

KB93z28 01-13-2012 11:26 PM

HELP!!!!!!!!!
 
2 Attachment(s)
I drive a 1999 GMC sierra 1500 reg cab short bed as a DD. So a couple days ago, I noticed my trucks body was sitting weird, it looked like it was sagging in the middle. I figured maybe cab mounts. So I finally crawled under it today to look at it, and it turns out the frame is cracked on both sides! Now I know the frame looks rough in the pictures, but its actually not that bad. The truck itself is in great shape, no body rust, except for the front bumper, runs great, no issues. What really gets me is that its a short truck, and I dont tow with it, I dont carry any heavy loads, the most ive ever put in the bed of this truck is an old 350. All I use this truck for is regular driving, and it has somewhat low mileage 118000. The two cracks seem to stop before halfway up the frame rail. My question is: is this repairable? or is this thing going to end up totaled?

DAWG 01-14-2012 12:49 AM

same thing happened at the same spot with my 99 silverado!
I welded plates on the frame to buy a few more months till I traded it in.
that was 3 years ago and it was holding great since.
it is caused by the brine they spray on the roads in the winter.
btw the brake lines will be going soon too!!!!
I would not drive the truck until you fix it!!!!!!!

KB93z28 01-14-2012 01:44 AM

Quote:

Originally Posted by DAWG (Post 60414)
same thing happened at the same spot with my 99 silverado!
I welded plates on the frame to buy a few more months till I traded it in.
that was 3 years ago and it was holding great since.
it is caused by the brine they spray on the roads in the winter.
btw the brake lines will be going soon too!!!!
I would not drive the truck until you fix it!!!!!!!

Thanks for the info Dawg, yeah the truck will sit till I figure it out. I think Ill just have it fixed just like you said with plates. Its a shame because the rest of the truck is solid, it runs and drives beautifully.

Formula413 01-14-2012 02:34 AM

You might consider talking to a frame shop too, they may have a better idea of what can be done

KB93z28 01-14-2012 07:00 AM

Quote:

Originally Posted by Formula413 (Post 60418)
You might consider talking to a frame shop too, they may have a better idea of what can be done

Anybody know of any frame shops in the blackstone valley/near worcester?

*LS1* Queen 01-14-2012 07:18 AM

damn that sucks!!!

ILuvPizzaTimes10 01-14-2012 01:02 PM

that looks like it was hit then pulled and fatigued? Shitty. go talk to Matt(bottlebird) he might have a better idea of what to do or be able to fix it???? MATTT!!!!!

DAWG 01-14-2012 01:02 PM

Quote:

Originally Posted by Formula413 (Post 60418)
You might consider talking to a frame shop too, they may have a better idea of what can be done

I did that and they said weld plates on each side. lol

irockidz28 01-15-2012 01:20 AM

fuck it. its a 99. thay were not the best year anyways (first year of the body style.) cheap fix that will hold it together. jack it up from under the crack and weld in a 2' peice of 2x2x1/4" angle on either side and it will hold it together.....for a while. would start looking for a truck tho.

Formula413 01-15-2012 01:59 AM

Is there enough good material around the crack to weld to? I know you said it's not as bad as it looks, but it looks pretty bad.


All times are GMT. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.