North East F-Body Association

North East F-Body Association (http://www.northeastf-bodyassn.com/index.php)
-   Lounge (http://www.northeastf-bodyassn.com/forumdisplay.php?f=2)
-   -   Auto Interior Repair Shops (http://www.northeastf-bodyassn.com/showthread.php?t=4290)

Grovlet 07-07-2012 07:16 PM

Auto Interior Repair Shops
 
Noticed today that with the Garage getting very warm, the headliner has finally given up at the edges around the top on the Z. Backboard is visible and about 3 inches actually peeled back on the drivers side below the T-Top......:gripe:

I also have a good tear in the passenger seat, so I may be looking to redo the front seats as well. (Leather is tired looking and getting more cracks each year):shiftyeyes:

So any recommendations for shops to replace the headliner, as it's ripped in quite a few spots, and clearly needs to be repaired, as well as seats....

frankzlt1 07-07-2012 07:56 PM

Where are you located.

Grovlet 07-07-2012 08:13 PM

Quote:

Originally Posted by frankzlt1 (Post 70581)
Where are you located.

East Granby CT, but would be willing to travel a little ways to ensure the job is done right.

DavidS 07-08-2012 12:56 AM

I'm not sure if I can help. Probably not.

One guy has done some nice work for me, but seems to prefer eurotrash cars: http://www.unionvilleautobody.com/uafx_welcome.shtml

and one guy has done some fantastic work for me, but works mostly on older cars: http://www.interiormotivesauto.com/

DemonWithin99 07-08-2012 02:07 AM

I might go see the guys in Unionville. i gotta get my driver seat fixed.

DavidS 07-08-2012 02:17 AM

Doug Golden is the contact name.

His ad:
"Unionville AutoFX
Love your car but not the chip in the windshield — or the ripped headliner, or the three-corner tear in the leather upholstery? Need some minor "fixes" before lease turn-in? Or are you looking to customize with pinstriping, graphics or tinting? Doug Golden at Unionville AutoFX has 35+ years experience in the custom auto market. Many services at your site, others in the shop; the work's always done with the same philosophy of reliability, on-time service and quality!
32 Depot Pl., Unionville, CT 06085 860-930-3618 "

Grovlet 07-08-2012 02:48 AM

Quote:

Originally Posted by DavidS (Post 70586)
Doug Golden is the contact name.

His ad:
"Unionville AutoFX
Love your car but not the chip in the windshield — or the ripped headliner, or the three-corner tear in the leather upholstery? Need some minor "fixes" before lease turn-in? Or are you looking to customize with pinstriping, graphics or tinting? Doug Golden at Unionville AutoFX has 35+ years experience in the custom auto market. Many services at your site, others in the shop; the work's always done with the same philosophy of reliability, on-time service and quality!
32 Depot Pl., Unionville, CT 06085 860-930-3618 "

Sounds perfect for what I'm looking for.... Done right but nothing more than repairing the issue... And if he can fix EuroTrash, an F-Body should be a cake walk.

So yes sounds like you can help! Thanks!:feather:

frankzlt1 07-08-2012 11:50 AM

There's a guy I use in oakville CT (Watertown) called Dave's upholstery does a great job and reasonably priced. He fixed my headliner and matched it perfect 2 years ago. He maybe a ride but if you call and schedule its done that that day.

ILuvPizzaTimes10 07-09-2012 01:12 AM

Hawks Third gen sells a new ABS headliner. redy for what ever color covering you want. if the stock headliner is peeling it usually can not be covered. its a pulp based fiber board and after it gets wet/starts to deteriorate its over. new headliner is like 100 bux and an easy recover job for yourself.

Grovlet 07-10-2012 02:27 AM

Quote:

Originally Posted by ILuvPizzaTimes10 (Post 70606)
Hawks Third gen sells a new ABS headliner. redy for what ever color covering you want. if the stock headliner is peeling it usually can not be covered. its a pulp based fiber board and after it gets wet/starts to deteriorate its over. new headliner is like 100 bux and an easy recover job for yourself.

I did see that.... New job is killing me for time:Dumb:, and I really want to fix the seat issue as well.....:animal-smiley-040:

So while I hate to do it, I've found sometimes it's just easier to suck it up and pay vs. the DIY route...:confused5::sFun_explosive: :sFun_explosive:


All times are GMT. The time now is 08:09 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.