Quote:
Originally Posted by ILuvPizzaTimes10
i dont mind man at all man. but its up to don now that he has my chip burner shit. look into that lumina PCM swap. i bet you can use the same harness and just swap over the connector for the ALDL. ill look into that some more tonight. i know tuner pro has a free version of the software and bin deff for the lumina 3.4l
|
They guy with the swap said exactly that. Once I buy his harness and the a lumina PCM, I can use tunerpro and a chip burner. Exactly the route I was thinking of going. But, I need to make sure someone can tune it that way.
I sent Don an e-mail. If I don't get a resp soon, I'll give him a buzz.
Yes, for a tune, I will bring it to Don. To test if his shit works, it makes more sense to bring the SW to the car just to test it out.
This is what my friend sent to me who bought this dude's OBDI replacement harness:
You will need a BURN2 Chip burner, aldl datalogging cable (for obd-1), and a chip adapter set (comes with two 512 chips). You can get all this on moates.net for ~ 200$
if you need me to show you specifically what to get i can do that.
Aside from that you will need a custom harness, laptop for logging purposes, and 7727 pcm (common in vettes, lumina's etc.) The pcm is a waterproof version that can be mounted where your stock one was located.
To datalog you will need to download tunerpro RT. It is free and i use version 4.14 because it's the easiest to use imo even though there are newer versions out.
To burn chips you will need tunerpro (to change your files) and you will have to download drivers (on moates.net) for your burner to work. You will also need to download a driver IIRC for your aldl datalogging cable to work (also on moates.net).