Quote:
Originally Posted by ILuvPizzaTimes10
Your harness wil not work at all. You will need to swap to atleast a 1994 up interior and engine hraness. The 1993 harness is bank fired NOT sequential like the 1994 up and ls1. So your stock harness is missing 8 extra wires as each bank only has one wire to fire the. Injectors on each side. It would be a nightmare to do it. And the ecm connectors are different and because of that the wiring is not long enough to reach across the newer style conector pcm's. Have a harness made for your custom app. Through efi connections or get a donor car/all new harnesses. 1993 is notttt easy. And your tranny will not work as it is not pcm controlled either. Not to mention the bolt pattern. Hope this info helps. If you need anymore I got it. I was doing this swap(kind of) with my 1993 t/a.
|
I know the tranny wont work, but I need all new interior from a 1994 and up car? I was thinking switching out just the cluster and leaving the rest.
__________________
1993 BGGM Z28, stock LT1, T56, 175k on original motor, basic bolt-ons. 273 whp, 308wtq. SOLD 
2001 Black WS6 TA Stock....for now....
DD: 2007 Dodge Ram 1500 quad cab sport, 6 inch RCX lift, 35x13.5 tires, 20x9 Fuel wheels, 20% tint all the way around, ZZ customs exhaust, Diablosport Trinity T1000 programmer.
|