Go Back   North East F-Body Association > Tech > LSX Powertrain

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 07-12-2011, 09:49 PM
Triaxle Triaxle is offline
New User (change by User CP, Edit Your Details)
 
Join Date: May 2011
Location: Pelham NH
Posts: 47
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 1
Dislikes (Given): 0
Dislikes (Received): 0
Default

Quote:
Originally Posted by ILuvPizzaTimes10 View Post
I'm hoping these are the new versions? If not do not. Install them a lot of guys have broken them(old version). Installed height is all about spring pressure and vale train geometry. Just picking a number doesn't work. Are they used or new? If used have them checked at your installed height. To make sure they are still at the right pressures. Now if your at 1.8-1.785 for heights and you shim them down further your spring pressure will be very high on seat. And its a lot harsher on the lifter and rockers to push the valve open. Id say stick with there advised height unless you have all the tools to make sure your not shooting way past 130# of seat pressure. If you do the open pressure will be past 500 if I m reading the chart right for these springs.
Yes these are the new version, unused. What I'm coming up with is 153 on the seat, opposed to 125 at 1.800. And 362 open pressure. But I'm working on the assumption that I would rather have more spring pressure than not enough. I should prolly give Comp a call and see what they recommend for these lobes.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:50 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.