|
#11
|
|||
|
|||
|
Dont forget theres actual rules stating where the door bars have to go down etc. I dont feel like looking them all up myself.
At 11.99 dont you need a "roll bar" Those are simple, once you get past 6pts I'm all set doing the work. Dont forget the welds "shoulds" have to pass inspection etc.
__________________
5.3L LSx, Fbody .500 cam, TH400, 4500 Stall, Moser 9" |
|
#12
|
||||
|
||||
|
it states the latest rules that a standard 4 point.(main hoop and 2 rear struts) are not legal. you need the 5th point. the drivers door bar. the door bar Can be swing out. and its doesnt state whether it can be slung/bent or not. So if it doesnt say you cant then you can. it just needs to be in the right location in relation to the drivers shoulder. and John as far as that kit goes All the pieces are pre-beveled wich is why i was really looking into it. and with the mild steel the welder at work will do Just fine. Miller-Matic 250 with a spool gun!!! So thats why i wanted to know if it was really worth it? cuz doing the work myself it will be Simple and Easy for the 5 point. and its good to 10.00!
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
|
#13
|
||||
|
||||
|
I would go this route if you have the skills / tools of course!
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
|
#14
|
||||
|
||||
|
ohh and No on the S&W. they have the rear struts going threw the speaker holes. Fuck that.
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
|
#15
|
|||
|
|||
|
So I went to order this....
1 comp engineering doesn't make this kit anymore. 2. They are charging this price just for the hoop now 3. Extra 350 for the strut kit with plates... Just an FYI
__________________
98z28 a4 Ls2 powered 403ci. 435/397 at the wheels... Yank 3200 stall... 3.73s in a craptastic 10bolt |
|
#16
|
||||
|
||||
|
step 1 remove interior step 2 deliever to halls step 3 paint step 4 put interior back in.
__________________
![]() 2000 SS Procharger 98 Z vert turbo 07 TB SS cai catback and tune |
|
#17
|
||||
|
||||
|
If comp doesn't make it then why does summit offer it and say ship today?
http://m.summitracing.com/parts/CEE-3121-K
__________________
![]() 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. ![]() BAAAAAA!!!!!! |
|
#18
|
|||
|
|||
|
Mike that is a great question... In the process of figuring it out
__________________
98z28 a4 Ls2 powered 403ci. 435/397 at the wheels... Yank 3200 stall... 3.73s in a craptastic 10bolt |
|
#19
|
||||
|
||||
|
Ya thats cheap but its thick heavy steel, go chromoly its not much more.............Once my car is all done my buddy could hook you up with the welding. Hes a great welder and i'm sure would give you a great deal.
__________________
![]() 1999 Camaro SS480 http://www.youtube.com/watch?v=hGXXuq9T2TI G,M. Precision Welding and Fabrication GMPrecisionWelding@gmail.com |
|
#20
|
||||
|
||||
|
fuckers going to make me put a cage in my car
whats the deal with the bolt in cage yay or nay
__________________
Nitrous is like hot girl with STD's. You know you wanna hit it, but your afraid of the consequences
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|