|
#6
04-19-2013, 01:13 AM
|
||||
|
||||
have heard them that noisy after the heads have been cut. were the heads cut if so how much? may need a push rod length checker to narrow it down. pull a valve cover and a rocker or 2. make sure the contact patch is in the center of the valve tip. if need be use some marking compound to verify.
__________________
 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore.  BAAAAAA!!!!!! 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode