|
#11
05-08-2010, 01:58 PM
|
||||
|
||||
^ If it JUST happens to be the lifters, the LS7 lifters are the direct LS1 replacements and are off the shelf Comp Cams units. If the oil pressure is good, that is a valid point. My buddy's oil pressure was good, but dropped every once in a while. The o-ring wasn't pinched, just wasn't seated good enough in the pump.
IMO, I'd rather do the oil pump first. Easier than taking the heads off. The O-ring problem we had wasn't starvation, it was aeration.
__________________
h/c/i/s/e 
|
|
|
Threaded Mode