|
#1
12-06-2012, 03:47 PM
|
|||
|
|||
What do you plan on doing to your car over the winter?
If you plan on doing something to your car over the winter post it in here.
Myself I plan on doing the following: New Seats Corbeau FX1 Pro http://corbeau.com/products/fixed_back_seats/fx1_pro/ Install 5 point harness for Road Racing/AX 3.42's to 3.73's Second Muffler so I will have Magna Flow Bullet Style added to my Magna Flow Cat back in order to meet sound requirements road racing and AX New Radiator mine is crap Lightening my car Here a little list: I havent fully figured exactly what I will take out but here are some Ideas Camaro Weight Reduction list Rear Speakers Fog Lights front Crash foam ABS AC Rear Crash foam rear carpet sound stuff Front seats replace with corbeu rear seats Body kit hood pins Visors Air bags and sensors and mounting shit Smaller battery replace Steering wheel fly wheel and clutch lightened clean out center console Hood gut/insulation mirror rubber trim misc studs in car carpet replace with year one light carpet random shit to cut out bumper supports cut remove interior excess metal cut up window crank brackets TCS and Cables Heat shielding under car Hood release latch/cables use one hood strut
__________________
 1999 Z28 Camaro SCCA ESP 2013 Tire Rack SCCA Match Tour ESP Class Winner 2014 Tire Rack SCCA Match Tour ESP Trophy Winner Support my 2014 Season like and share facebook.com/87esp | Directtire.com 
|
|
#3
12-06-2012, 04:12 PM
|
||||
|
||||
|
Quote:
I plan on removing the tranny again. for a Mainshaft(mines Twisted so the D/S wont slide smoothly) get the 4th Weld wheel and 2 new front tires probably going with the Nexen SB802's again. walmart has them free ship to store for 52 bux each! i cant find anything else in that size for anything even Close to that price. Finish the cold idle tuning. Rest of the tune is good. just need to varify with a wide band. new chromoly Driveshaft so i dont shatter the stocker. and MAYBE some paint. and camarokid why are you removing SOOO much shit? needs it to Auto-x? i could see lighter for drag but??? not being a douche. serious questions as i have never done it.
__________________
 1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore.  BAAAAAA!!!!!!
|
|
#4
12-06-2012, 04:30 PM
|
|||
|
|||
|
Quote:
lol well with autocross and roadracing the lighter a car is the less weight is transferred when under a lateral load which is why mitatas do so well. My car isnt exactly my daily anymore and I think I reached the point of not caring so it is going to eventually become a full blown track car. That list was more or less just ideas I will will probably only actually do half of that (for now). Also I need to change my pedals the stocks suck for heel toeing. Iam beyond addicted to autocross and road racing its more of a sickness. Plus what I'm doing is nothing compared to people on FRRAX, some actually cut the rear ends and reweld them to add negative camber on a solid axle rear. On a side note you should see a 5th gen race clocking in at 4k with a driver its so terrible.
__________________
1999 Z28 Camaro SCCA ESP 2013 Tire Rack SCCA Match Tour ESP Class Winner 2014 Tire Rack SCCA Match Tour ESP Trophy Winner Support my 2014 Season like and share facebook.com/87esp | Directtire.com
|
|
#5
12-06-2012, 05:01 PM
|
||||
|
||||
|
yeah i know the 5th gens are pigs. just never put much thought to weight on a road course.
__________________
1998 Firebird:buncha parts thats used to make it go fast..... not so much anymore. BAAAAAA!!!!!!
|
|
#7
12-06-2012, 06:10 PM
|
|||
|
|||
|
Quote:
 
__________________
1999 Z28 Camaro SCCA ESP 2013 Tire Rack SCCA Match Tour ESP Class Winner 2014 Tire Rack SCCA Match Tour ESP Trophy Winner Support my 2014 Season like and share facebook.com/87esp | Directtire.com
|
|
#8
12-06-2012, 07:49 PM
|
|||
|
|||
|
Replacing the blown up ls1 with a 32k mile short block
having the stock 853 heads cleaned up nice with a valve job and have them decked. Maybe up the compression a bit. Fixing a torn up arp wheel stud A bunch of clean up work. Already flat black the engine bay area. Primed and coated the oil pan, timing cover, valve covers, throttle body.
__________________
2000 SS Th350, FTI 4200 stall , cam, full bolt-ons, 150 wetshot, Moser 9inch/locker/4.11s, Slowhawk tuned. 493rwhp 570rwtq. 10.97 @ 127.7 1.58 60' and M6 10.84 @ 126.3 1.55 60' Th350 SOLD BUT NOT FORGOTTEN New Toy - 06 Torrid Red Gto M6. 231/242 cam, Kooks, magnaflow, GForce, Monster stg2, lingenfelter cai, 411rwhp 385rwtq. 12.40@111
|
|
#9
12-06-2012, 08:30 PM
|
||||
|
||||
|
Well if all goes well doing some shakedowns in florida throwing in a cage and some corbeau's in it, parachute and all the safety gear needed. Also building up a forged motor......And trying to work on the M3 LS1 swap but thats next.....
__________________
 1999 Camaro SS480 http://www.youtube.com/watch?v=hGXXuq9T2TI G,M. Precision Welding and Fabrication GMPrecisionWelding@gmail.com
|
|
#10
12-06-2012, 09:47 PM
|
|||
|
|||
|
Quote:
__________________
1999 Z28 Camaro SCCA ESP 2013 Tire Rack SCCA Match Tour ESP Class Winner 2014 Tire Rack SCCA Match Tour ESP Trophy Winner Support my 2014 Season like and share facebook.com/87esp | Directtire.com
|
 |
|
|
Linear Mode
