|
|
|
#1
|
||||
|
||||
|
NP just wish ya had the torque converter issue taken care of so you wont be stalling at all the stops !
with the 4:11 rear and the stout cam you should be running at least a 3000-3500 stall converter.
__________________
![]() "As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen US NAVY RETIRED |
|
#2
|
||||
|
||||
|
OK Dawg, When I call TCI I should tell them:
Stout cam vacuum idling in neutral is 12 in vacuum idling in drive is 5 in carb is a 750 double pumper TH400 trans 4.11 rear end current stall converter is 2500 rpm sometimes it stalls out when I am at a light and what is the recommended stall converter? Anything else I should tell TCI?
__________________
![]() 68 Camaro (?350 SB) 69 Camaro (L72 427 BB) 69 Camaro (DZ 302 SB - www.z28.net) Camaro - A friendly flying car – from the French - the first half "camarade/friend" and the last half “aero/of the air". |
![]() |
|
|