|
#1
|
|||
|
|||
|
Parting out my 1995 z28 Drag Car Project. Decided to keep the shell with the intentions of building the car some day down the road. All parts listed are brand new. They were mounted on the car, but never driven on.
_________________________________ Wolfe Racecraft Cromoly Lowers http://www.wolferacecraft.com/detail.aspx?ID=219 These control arms also come with a set of offset bushings for added tire clearance. After I ordered the arms, I called Wolfe and purchased the bushings which were an additional 56.00 shipped, so the arms come with both standard and offset bushings. They were mounted to make the car roll and that was it. ![]() ![]() 210.00 with both set of bushings __________________________ LS1 Spindles and Brakes Includes LS1 Spindles that have been sandblasted and painted VHT chassis black. Caliper brackets, Calipers, Good Pads, and Cut Rotors also included. ![]() ![]() 125.00 Complete ________________________________ Aeromotive A1000 Pump (used) This pump is a few years old and runs great. In pretty good cosmetic shape as well. ![]() 200.00 __________________________ Spohn Solid Motor Mounts Solid tubular motor mount stands from Spohn for 98-02 k-frames. Never had the motor mounted to them. Includes hardware for frame side. ![]() 100.00 ______________________ 16" zr1 Replica Wheels This is a set of silver zr1 replicas. The wheels are 16x8 and are in excellent condition. There is no curb rash, and all the wheels are straight, however there are a few little scratches and I am missing one center cap. There are tires installed, but they don't have much life left. ![]() 275.00 for the full set _________________________ B&M Pro Ratchet Shifter http://www.jegs.com/i/B%26M/130/80840/10002/-1?CT=999 Shifter is in good shape. Comes with 5ft cable and most of the brackets, but you will need to purchase the arm that attaches to the actual trans. ![]() 125.00 _______________________ Eibach Pro Kit REAR Coils This is for a REAR set only of Eibach Pro Kit springs (roughly 1" drop). Again, this is for the REAR only, no fronts included. ![]() 50.00 _____________________________________ Strange Front Single Adjustable Coilovers Sale Pending ![]() ![]() Sale Pending ______________________________________ Affco Double Adjustable Rear Coilovers Sale Pending ![]() ![]() Sale Pending |
|
#2
|
||||
|
||||
|
HUH?!?!?!?
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
|
#3
|
||||
|
||||
|
where are u located exactly? im interested
__________________
Tony "Mr. Camaro" Quadros
~ 95 z28 350ci LT1 ~ "Just another bolt on only LT1 that can kick ur LS1's a$$!" Special thx: Frank Cahill, Noyzee Racing, Coastal Customs, Shon Herron, John P. (1slowformula) Cecil - 11.998 @ 111.02mph 1.635 60ft ... 1/8th 7.588 @ 89.33mph |
|
#4
|
|||
|
|||
|
Springfield ma
|
|
#5
|
|||
|
|||
|
Sale Pending on the Affcos
Added Spohn solid motor mounts |
|
#6
|
||||
|
||||
|
just an irrevelant question but what did you use to paint the spindles and brakes they look real good.
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
|
#7
|
|||
|
|||
|
VHT Chassis Paint on the spindles and caliper brackets.
Dupont Caliper paint |
|
#8
|
||||
|
||||
|
nice.
__________________
![]() 95 Z28 hard top - LT1 | 4L60e | bolt ons | Yank SS3600 | suspension | viking coil overs | 3.42 10 bolt | 3520 lbs - 12.331 @ 108.22mph 1.668 60' 08 Saab 9-7x - L96 6.0 swap | L92 heads/intake/TB | LS6 cam | LS9 springs | 7.425" hardened pushrods | CAI | 1-3/4" stepped LT's | catback | 4L60E | FTI 3000 278mm converter |
|
#9
|
||||
|
||||
|
wtf
__________________
355 lt4 9.0:1.@12psi of boost real quick front mount log setup Garrett 60-1 96 . ar hot side builds done and running worth every penny!!! LIVE FAST DIE BOOSTING!!!! |
|
#10
|
|||
|
|||
|
Sale pending on both sets of coilovers.
|
![]() |
|
|