Any particular thread...

[Motaboata]

i do have a 98... and i will look into the dropping of the tank... thanks gents... o it is a 98

[ILuvPizzaTimes10]

Originally Posted by Motaboata

i do have a 98... o it is a 98

Yeah we got it. Its a 98!!!!

[Formula413]

What year is the car?

Personally I would do the trapdoor but if your exhaust is dumped and you don't have to fight with stuck pipes than it might be worth dropping the rear.

[ILuvPizzaTimes10]

yeah you cut a 6 foot hole out of your floor and some how find a way to stick it back in and tell me its an awesome idea.......

[My84Z]

http://ls1tech.com/forums/fueling-in...-98-fbody.html

Picture half way down black car

[ILuvPizzaTimes10]

Originally Posted by 01ssreda4

On the one 98 I've done it had connectors that were along the frontside of the tank. We cut the original hole and could not reach the connectors so we ended up making an L shaped cut sorta like what's posted above by stangtrader only we went a little further with the L. I'm sure you're cut will look similar when its all said and done.

From that same page. you have to cut further over on the 98 as the hard steel lines run down the tank and over a good foot. this is why i just dropped the tank.

[Formula413]

Originally Posted by ILuvPizzaTimes10

yeah you cut a 6 foot hole out of your floor and some how find a way to stick it back in and tell me its an awesome idea.......

LOL You mean 6 inch? If you look in that thread one person made a nice clean cover for the hole out of sheet metal, I would say that's the way to go. Also keep in mind lots of people don't have access to a lift or good facilities to work on the car. Many cars have these from the factory for a reason.

[ILuvPizzaTimes10]

yeah and it can be dropped in a few hours and back up on your back with a walmart jack and stands. Thats all im saying. the 98 is a bitch. and unless turbo or supercharged or a heavy shot of nitrous where a BIG setup in the tank is being changed out or fixed frequently id drop it. Thats just what im saying.

[My84Z]

I did mine the first time dropping the tank and the hardest part was getting the exhaust off.

[KLAB]

dont bend the filler neck on the way out. sucks to get it back in lol. literally the hardest part I wanna smack everyone that told me to cut a hold in my floor because I almost did